ХАЛЛ ГРУПП · Equipment catalogue

Danfoss APP 11/1200 / APP 11/1500 pumps

Axial-piston pump for reverse-osmosis systems. Parameters use the checked Danfoss 2024.06 data-sheet revision. Tabulated flow belongs to the stated speed and maximum table pressure, not any arbitrary duty point. Sound is measured on a motor-pump unit at maximum pressure and speed, at 1 m under EN ISO20361/EN ISO3744; it is not a noise guarantee for every installation. Pump, drive, coupling, filtration and supply scope are agreed separately.

Open selection and send an enquiry client@hallgroup.ru

Technical parameters

Technical source revision: AI274333290009en-000702 · 2024.06
Table fluid temperature: 2–50 °C; depends on NaCl
Table ambient temperature: 0–50 °C; see source qualification
Inlet filtration, section 9.1: 10 µm absolute; efficiency 99.98%; β10 ≥5000
Integrated flushing valve: Present in stated APP range
Inlet/outlet on sheet 30: M42 × 1.5; depth 17 mm
Bleed connection: G 1/4; hex key 6 mm
DIN 6885 parallel key: 10 × 8 × 45 mm
Earth connection on sheet 30: M8; depth 8 mm
Thermal sensor on sheet 30: M6; depth 8 mm
Dimension line 337 on sheet 30: 337 mm

Configurations and specifications

Configuration	Technical parameters	IMPA correspondence
APP 11/1200 · 180B3212	Manufacturer article: 180B3212 Geometric displacement: 166.4 cm³/rev Minimum/maximum outlet pressure: 10 / 83 barg Continuous inlet pressure: 2–5 barg Peak inlet pressure: 10 barg Continuous speed: 700–1200 rpm Typical flow at 1000 rpm and maximum pressure: 9.22 m³/h Typical flow at 1200 rpm and maximum pressure, source unit: 48.71 gpm Torque at maximum outlet pressure: 229 Nm Dry weight in 2024 data sheet: 78 kg Table motor-pump sound pressure, 1 m: 85 dB(A) Footprint with recommended IEC motor, excluding service: 0.48 m² Typical drive at stated duty, not package scope: 40.0 HP at 1200 rpm	A direct IMPA code is not confirmed
APP 11/1500 · 180B3211	Manufacturer article: 180B3211 Geometric displacement: 137.4 cm³/rev Minimum/maximum outlet pressure: 10 / 70 barg Continuous inlet pressure: 2–5 barg Peak inlet pressure: 10 barg Continuous speed: 700–1500 rpm Typical flow at 1000 rpm and maximum pressure: 7.50 m³/h Typical flow at 1200 rpm and maximum pressure, source unit: 39.61 gpm Torque at maximum outlet pressure: 166 Nm Dry weight in 2024 data sheet: 78 kg Table motor-pump sound pressure, 1 m: 85 dB(A) Footprint with recommended IEC motor, excluding service: 0.48 m² Typical drive at stated duty, not package scope: 30.0 kW at 1500 rpm Typical flow at 1500 rpm and maximum pressure: 11.25 m³/h	A direct IMPA code is not confirmed

Selection and applicability

APP, APP W, APP S and ATEX articles are not interchangeable by name. Only the explicitly selected standard APP/APP W articles are shown. All barg values are gauge pressures. The 2024 dry mass is not the net/gross mass of a current article page; confirm revision and shipping mass before ordering. Tables state ambient 0–50 °C, section 8.1 states 2–50 °C; agree operation at 0–2 °C. Check fluid temperature and corrosion resistance against NaCl concentration. No exact IMPA code is confirmed for these additions.

Photographs and drawings

**Danfoss APP 11–13 — factory dimensional sheet**Dimensional sheet on page 30 of AI274333290009en-000702, revision 2024.06. The manufacturer states its size range on the sheet. This is the pump drawing, not a motor-pump assembly; agree the installation drawing for the supplied execution.

**Danfoss APP 11_1500 — article 180B3211 photo**Manufacturer product-page photograph for article 180B3211, checked 6 Nov 2026. A catalogue representation, not an individual unit offered for supply; the photo does not establish a datasheet revision or package scope.

Include with your enquiry

Fluid, temperature, viscosity and solids
Flow and pressure at the duty point; operating cycle
Materials, seals, threads and available power or compressed air

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiry Contacts