Skip to content
RUEN中文
  1. Home
  2. Equipment catalogue
  3. Hoses, Camlock and hose couplings: IMPA 35

ХАЛЛ ГРУПП · Equipment catalogue

Hoses, Camlock and hose couplings: IMPA 35

Coded and sized hoses and connections for water, compressed air and petroleum service, including Camlock and hose accessories. Verify fluid, pressure, material and thread: BSPT and NPT are not identified by nominal size alone. Welding gas hoses are selected separately by gas, marking and connections.

Open selection and send an enquiryclient@hallgroup.ru

Include with your enquiry

  • Code, connection type, hose diameter and length
  • Fluid, temperature and pressure
  • Material, thread, seal and mating part

Models and configurations

This is a ХАЛЛ ГРУПП selection, not the complete official IMPA Marine Stores Guide database. A code does not replace a technical specification; the identity of a particular model and execution is checked separately.

Camlock F adapter, SS316, male thread

Male cam-and-groove adapter with BSPT male thread. Select the size; operating conditions and compatibility are reviewed with the enquiry.

IMPA codeConfigurationTechnical parameters
3517811/2″ (DN13)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 1/2″ (DN13)
  • Variant thread: BSPT 1/2″
  • Variant working pressure: 16 bar
3517823/4″ (DN19)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 3/4″ (DN19)
  • Variant thread: BSPT 3/4″
  • Variant working pressure: 18 bar
3517831″ (DN25)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 1″ (DN25)
  • Variant thread: BSPT 1″
  • Variant working pressure: 18 bar
3517841 1/4″ (DN32)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 1 1/4″ (DN32)
  • Variant thread: BSPT 1 1/4″
  • Variant working pressure: 18 bar
3517851 1/2″ (DN38)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 1 1/2″ (DN38)
  • Variant thread: BSPT 1 1/2″
  • Variant working pressure: 18 bar
3517862″ (DN50)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 2″ (DN50)
  • Variant thread: BSPT 2″
  • Variant working pressure: 18 bar
3517872 1/2″ (DN63)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 2 1/2″ (DN63)
  • Variant thread: BSPT 2 1/2″
  • Variant working pressure: 18 bar
3517883″ (DN75)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 3″ (DN75)
  • Variant thread: BSPT 3″
  • Variant working pressure: 14 bar
3517894″ (DN100)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 4″ (DN100)
  • Variant thread: BSPT 4″
  • Variant working pressure: 7 bar
3517905″ (DN125)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 5″ (DN125)
  • Variant thread: BSPT 5″
  • Variant working pressure: 7 bar
3517916″ (DN150)
  • Coupling type: Camlock F
  • Body material: SS316
  • Camlock size: 6″ (DN150)
  • Variant thread: BSPT 6″
  • Variant working pressure: 7 bar

Camlock A adapter, SS316, female thread

Male cam-and-groove adapter with BSP female thread. Select the matching coupling and thread size.

IMPA codeConfigurationTechnical parameters
3517311/2″ (DN13)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 1/2″ (DN13)
  • Variant thread: BSP 1/2″
  • Variant working pressure: 16 bar
3517323/4″ (DN19)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 3/4″ (DN19)
  • Variant thread: BSP 3/4″
  • Variant working pressure: 18 bar
3517331″ (DN25)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 1″ (DN25)
  • Variant thread: BSP 1″
  • Variant working pressure: 18 bar
3517341 1/4″ (DN32)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 1 1/4″ (DN32)
  • Variant thread: BSP 1 1/4″
  • Variant working pressure: 18 bar
3517351 1/2″ (DN38)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 1 1/2″ (DN38)
  • Variant thread: BSP 1 1/2″
  • Variant working pressure: 18 bar
3517362″ (DN50)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 2″ (DN50)
  • Variant thread: BSP 2″
  • Variant working pressure: 18 bar
3517372 1/2″ (DN63)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 2 1/2″ (DN63)
  • Variant thread: BSP 2 1/2″
  • Variant working pressure: 18 bar
3517383″ (DN75)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 3″ (DN75)
  • Variant thread: BSP 3″
  • Variant working pressure: 14 bar
3517394″ (DN100)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 4″ (DN100)
  • Variant thread: BSP 4″
  • Variant working pressure: 7 bar
3517405″ (DN125)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 5″ (DN125)
  • Variant thread: BSP 5″
  • Variant working pressure: 7 bar
3517416″ (DN150)
  • Coupling type: Camlock A
  • Body material: SS316
  • Camlock size: 6″ (DN150)
  • Variant thread: BSP 6″
  • Variant working pressure: 7 bar

Camlock C coupler, SS316, hose tail

Cam-and-groove coupler with a hose tail and NBR seal. Hose retention is reviewed for the complete assembly.

IMPA codeConfigurationTechnical parameters
3520301/2″ (DN13)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 1/2″ (DN13)
  • Hose-tail diameter: 13 mm
  • Variant working pressure: 16 bar
  • Seal: NBR
3520313/4″ (DN19)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 3/4″ (DN19)
  • Hose-tail diameter: 19 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520321″ (DN25)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 1″ (DN25)
  • Hose-tail diameter: 25 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520331 1/4″ (DN32)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 1 1/4″ (DN32)
  • Hose-tail diameter: 32 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520341 1/2″ (DN38)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 1 1/2″ (DN38)
  • Hose-tail diameter: 38 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520352″ (DN50)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 2″ (DN50)
  • Hose-tail diameter: 50 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520362 1/2″ (DN63)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 2 1/2″ (DN63)
  • Hose-tail diameter: 63 mm
  • Variant working pressure: 18 bar
  • Seal: NBR
3520373″ (DN75)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 3″ (DN75)
  • Hose-tail diameter: 75 mm
  • Variant working pressure: 14 bar
  • Seal: NBR
3520384″ (DN100)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 4″ (DN100)
  • Hose-tail diameter: 100 mm
  • Variant working pressure: 7 bar
  • Seal: NBR
3520395″ (DN125)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 5″ (DN125)
  • Hose-tail diameter: 125 mm
  • Variant working pressure: 7 bar
  • Seal: NBR
3520406″ (DN150)
  • Coupling type: Camlock C
  • Body material: SS316
  • Camlock size: 6″ (DN150)
  • Hose-tail diameter: 150 mm
  • Variant working pressure: 7 bar
  • Seal: NBR

Camlock D coupler, SS316, female thread

Cam-and-groove coupler with BSP female thread and an NBR seal. Size and duty are reviewed for the selected variant.

IMPA codeConfigurationTechnical parameters
3518311/2″ (DN13)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 1/2″ (DN13)
  • Variant thread: BSP 1/2″
  • Variant working pressure: 16 bar
  • Seal: NBR
3518323/4″ (DN19)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 3/4″ (DN19)
  • Variant thread: BSP 3/4″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518331″ (DN25)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 1″ (DN25)
  • Variant thread: BSP 1″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518341 1/4″ (DN32)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 1 1/4″ (DN32)
  • Variant thread: BSP 1 1/4″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518351 1/2″ (DN38)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 1 1/2″ (DN38)
  • Variant thread: BSP 1 1/2″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518362″ (DN50)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 2″ (DN50)
  • Variant thread: BSP 2″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518372 1/2″ (DN63)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 2 1/2″ (DN63)
  • Variant thread: BSP 2 1/2″
  • Variant working pressure: 18 bar
  • Seal: NBR
3518383″ (DN75)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 3″ (DN75)
  • Variant thread: BSP 3″
  • Variant working pressure: 14 bar
  • Seal: NBR
3518394″ (DN100)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 4″ (DN100)
  • Variant thread: BSP 4″
  • Variant working pressure: 7 bar
  • Seal: NBR
3518405″ (DN125)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 5″ (DN125)
  • Variant thread: BSP 5″
  • Variant working pressure: 7 bar
  • Seal: NBR
3518416″ (DN150)
  • Coupling type: Camlock D
  • Body material: SS316
  • Camlock size: 6″ (DN150)
  • Variant thread: BSP 6″
  • Variant working pressure: 7 bar
  • Seal: NBR

Camlock E adapter, SS316, hose tail

Male cam-and-groove adapter with a hose tail. Select the inch size; hose bore and retention method are confirmed for the assembly.

IMPA codeConfigurationTechnical parameters
3519301/2″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 1/2″
3519313/4″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 3/4″
3519321″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 1″
3519331 1/4″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 1 1/4″
3519341 1/2″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 1 1/2″
3519352″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 2″
3519362 1/2″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 2 1/2″
3519373″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 3″
3519384″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 4″
3519395″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 5″
3519406″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 6″
3519418″
  • Coupling type: Camlock E
  • Body material: SS316
  • Camlock size: 8″

Camlock B coupler, SS316, NPT male thread

Cam-and-groove coupler with NPT male thread and an NBR seal. Check the mating thread; BSP and NPT are not automatically interchangeable.

IMPA codeConfigurationTechnical parameters
3518811/2″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 1/2″
  • Variant thread: NPT 1/2″
  • Seal: NBR
3518823/4″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 3/4″
  • Variant thread: NPT 3/4″
  • Seal: NBR
3518831″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 1″
  • Variant thread: NPT 1″
  • Seal: NBR
3518841 1/4″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 1 1/4″
  • Variant thread: NPT 1 1/4″
  • Seal: NBR
3518851 1/2″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 1 1/2″
  • Variant thread: NPT 1 1/2″
  • Seal: NBR
3518862″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 2″
  • Variant thread: NPT 2″
  • Seal: NBR
3518872 1/2″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 2 1/2″
  • Variant thread: NPT 2 1/2″
  • Seal: NBR
3518883″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 3″
  • Variant thread: NPT 3″
  • Seal: NBR
3518894″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 4″
  • Variant thread: NPT 4″
  • Seal: NBR
3518905″
  • Coupling type: Camlock B
  • Body material: SS316
  • Camlock size: 5″
  • Variant thread: NPT 5″
  • Seal: NBR

Camlock DC dust cap, SS316

Closed cam-lever cap protecting a disconnected male adapter from contamination. Any pressurised duty requires separate manufacturer-document verification.

IMPA codeConfigurationTechnical parameters
3520801/2″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 1/2″
  • Seal: NBR
3520813/4″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 3/4″
  • Seal: NBR
3520821″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 1″
  • Seal: NBR
3520831 1/4″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 1 1/4″
  • Seal: NBR
3520841 1/2″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 1 1/2″
  • Seal: NBR
3520852″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 2″
  • Seal: NBR
3520862 1/2″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 2 1/2″
  • Seal: NBR
3520873″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 3″
  • Seal: NBR
3520884″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 4″
  • Seal: NBR
3520895″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 5″
  • Seal: NBR
3520906″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 6″
  • Seal: NBR
3520918″
  • Coupling type: Camlock DC
  • Body material: SS316
  • Camlock size: 8″
  • Seal: NBR

Camlock DP dust plug, SS316

Closed male plug protecting a disconnected cam coupler from contamination. Pressure-retaining service requires separate approval of the application.

IMPA codeConfigurationTechnical parameters
3519801/2″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 1/2″
3519813/4″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 3/4″
3519821″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 1″
3519831 1/4″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 1 1/4″
3519841 1/2″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 1 1/2″
3519852″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 2″
3519862 1/2″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 2 1/2″
3519873″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 3″
3519884″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 4″
3519895″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 5″
3519906″
  • Coupling type: Camlock DP
  • Body material: SS316
  • Camlock size: 6″

Camlock A adapter, aluminium, female thread

Aluminium male cam-and-groove adapter with BSP female thread. Media and mating-component compatibility are checked for the selected size.

IMPA codeConfigurationTechnical parameters
3517011/2″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 1/2″
  • Variant thread: BSP 1/2″
  • Variant working pressure: 16 bar
3517023/4″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 3/4″
  • Variant thread: BSP 3/4″
  • Variant working pressure: 16 bar
3517031″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 1″
  • Variant thread: BSP 1″
  • Variant working pressure: 18 bar
3517041 1/4″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 1 1/4″
  • Variant thread: BSP 1 1/4″
  • Variant working pressure: 18 bar
3517051 1/2″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 1 1/2″
  • Variant thread: BSP 1 1/2″
  • Variant working pressure: 18 bar
3517062″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 2″
  • Variant thread: BSP 2″
  • Variant working pressure: 18 bar
3517072 1/2″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 2 1/2″
  • Variant thread: BSP 2 1/2″
  • Variant working pressure: 18 bar
3517083″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 3″
  • Variant thread: BSP 3″
  • Variant working pressure: 8 bar
3517094″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 4″
  • Variant thread: BSP 4″
  • Variant working pressure: 7 bar
3517105″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 5″
  • Variant thread: BSP 5″
  • Variant working pressure: 5 bar
3517116″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 6″
  • Variant thread: BSP 6″
  • Variant working pressure: 5 bar
3517128″
  • Coupling type: Camlock A
  • Body material: Al
  • Camlock size: 8″
  • Variant thread: BSP 8″
  • Variant working pressure: 5 bar

Aluminium Camlock B coupler, male thread

Cam coupler with two locking arms and a threaded tail for a pipe connection. We match the adapter, thread and seal to the service medium.

IMPA codeConfigurationTechnical parameters
3518511/2″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Male thread
3518523/4″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Male thread
3518531″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Male thread
3518541 1/4″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Male thread
3518551 1/2″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Male thread
3518562″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Male thread
3518572 1/2″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Male thread
3518583″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Male thread
3518594″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Male thread
3518605″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Male thread
3518616″
  • Coupling type: Camlock B
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Male thread

Aluminium Camlock C coupler, hose tail

Cam coupler with locking arms and a ribbed hose tail. Coupling size, hose fit and retention method are checked together.

IMPA codeConfigurationTechnical parameters
3520001/2″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Hose tail
3520013/4″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Hose tail
3520021″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Hose tail
3520031 1/4″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Hose tail
3520041 1/2″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Hose tail
3520052″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Hose tail
3520062 1/2″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Hose tail
3520073″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Hose tail
3520084″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Hose tail
3520095″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Hose tail
3520106″
  • Coupling type: Camlock C
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Hose tail

Aluminium Camlock D coupler, female thread

Cam coupler with two locking arms and an internal pipe thread. We confirm the mating adapter and service conditions for the line.

IMPA codeConfigurationTechnical parameters
3518011/2″
  • Coupling type: Camlock D
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Female thread
3518023/4″
  • Coupling type: Camlock D
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Female thread
3518031″
  • Coupling type: Camlock D
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Female thread

Aluminium Camlock E adapter, hose tail

Cam adapter with a circumferential locking groove and hose tail. Select it with a matching coupler and hose attachment.

IMPA codeConfigurationTechnical parameters
3519001/2″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Hose tail
3519013/4″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Hose tail
3519021″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Hose tail
3519031 1/4″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Hose tail
3519041 1/2″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Hose tail
3519052″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Hose tail
3519062 1/2″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Hose tail
3519073″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Hose tail
3519084″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Hose tail
3519095″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Hose tail
3519106″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Hose tail
3519118″
  • Coupling type: Camlock E
  • Body material: Aluminium
  • Nominal coupling size: 8″
  • Connection / form: Hose tail

Aluminium Camlock F adapter, male thread

Cam adapter with a male pipe thread. Select the nominal size, then confirm the thread form and sealing arrangement.

IMPA codeConfigurationTechnical parameters
3517511/2″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Male thread
3517523/4″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Male thread
3517531″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Male thread
3517541 1/4″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Male thread
3517551 1/2″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Male thread
3517562″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Male thread
3517572 1/2″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Male thread
3517583″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Male thread
3517594″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Male thread
3517605″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Male thread
3517616″
  • Coupling type: Camlock F
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Male thread

Aluminium Camlock DC dust cap

Dust cap with cam arms covers a male adapter during storage or maintenance. Pressure service requires separate confirmation.

IMPA codeConfigurationTechnical parameters
3520501/2″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Cap with cam arms
3520513/4″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Cap with cam arms
3520521″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Cap with cam arms
3520531 1/4″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Cap with cam arms
3520541 1/2″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Cap with cam arms
3520552″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Cap with cam arms
3520562 1/2″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Cap with cam arms
3520573″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Cap with cam arms
3520584″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Cap with cam arms
3520595″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Cap with cam arms
3520606″
  • Coupling type: Camlock DC
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Cap with cam arms

Aluminium Camlock DP dust plug

Dust plug inserts into a matching cam coupler to cover its opening. Service use, sealing and allowable pressure are confirmed separately.

IMPA codeConfigurationTechnical parameters
3519501/2″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 1/2″
  • Connection / form: Plug with locking groove
3519513/4″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 3/4″
  • Connection / form: Plug with locking groove
3519521″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 1″
  • Connection / form: Plug with locking groove
3519531 1/4″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 1 1/4″
  • Connection / form: Plug with locking groove
3519541 1/2″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 1 1/2″
  • Connection / form: Plug with locking groove
3519552″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 2″
  • Connection / form: Plug with locking groove
3519562 1/2″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 2 1/2″
  • Connection / form: Plug with locking groove
3519573″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 3″
  • Connection / form: Plug with locking groove
3519584″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 4″
  • Connection / form: Plug with locking groove
3519595″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 5″
  • Connection / form: Plug with locking groove
3519606″
  • Coupling type: Camlock DP
  • Body material: Aluminium
  • Nominal coupling size: 6″
  • Connection / form: Plug with locking groove

Rubber water delivery hose

Quantity is in running metres. Coil length is shown separately; continuous length, cutting options and operating temperature are confirmed in the offer.

IMPA codeConfigurationTechnical parameters
350151nom. 12 mm / ID 12.7 mm
  • Nominal size: 12 mm
  • Inside diameter: 12.7 mm
  • Outside diameter: 20.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 5 kgf/cm²
  • Coil length of the listed design: 20 m
350152nom. 15 mm / ID 15.9 mm
  • Nominal size: 15 mm
  • Inside diameter: 15.9 mm
  • Outside diameter: 24.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 5 kgf/cm²
  • Coil length of the listed design: 20 m
350153nom. 19 mm / ID 19.0 mm
  • Nominal size: 19 mm
  • Inside diameter: 19.0 mm
  • Outside diameter: 28.0 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 5 kgf/cm²
  • Coil length of the listed design: 20 m
350154nom. 22 mm / ID 22.0 mm
  • Nominal size: 22 mm
  • Inside diameter: 22.0 mm
  • Outside diameter: 32.0 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 5 kgf/cm²
  • Coil length of the listed design: 20 m
350155nom. 25 mm / ID 25.4 mm
  • Nominal size: 25 mm
  • Inside diameter: 25.4 mm
  • Outside diameter: 35.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 4 kgf/cm²
  • Coil length of the listed design: 20 m
350156nom. 32 mm / ID 31.8 mm
  • Nominal size: 32 mm
  • Inside diameter: 31.8 mm
  • Outside diameter: 43.0 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 4 kgf/cm²
  • Coil length of the listed design: 20 m
350159nom. 45 mm / ID 44.5 mm
  • Nominal size: 45 mm
  • Inside diameter: 44.5 mm
  • Outside diameter: 58.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 4 kgf/cm²
  • Coil length of the listed design: 20 m

Rubber compressed-air hose

Order by the running metre, rather than by the coil. Dimensions and pressure refer to the listed design; cut length, temperature and connections are agreed before supply.

IMPA codeConfigurationTechnical parameters
350101nom. 6 mm / ID 6.3 mm
  • Nominal size: 6 mm
  • Inside diameter: 6.3 mm
  • Outside diameter: 14.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 15 kgf/cm²
  • Coil length of the listed design: 100 m
350102nom. 9 mm / ID 9.5 mm
  • Nominal size: 9 mm
  • Inside diameter: 9.5 mm
  • Outside diameter: 18.0 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 15 kgf/cm²
  • Coil length of the listed design: 100 m
350103nom. 12 mm / ID 12.7 mm
  • Nominal size: 12 mm
  • Inside diameter: 12.7 mm
  • Outside diameter: 24.0 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 10 kgf/cm²
  • Coil length of the listed design: 100 m
350104nom. 15 mm / ID 15.9 mm
  • Nominal size: 15 mm
  • Inside diameter: 15.9 mm
  • Outside diameter: 27.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 10 kgf/cm²
  • Coil length of the listed design: 100 m
350105nom. 19 mm / ID 19.0 mm
  • Nominal size: 19 mm
  • Inside diameter: 19.0 mm
  • Outside diameter: 30.5 mm
  • Reinforcement designation: 2B
  • Working pressure of the listed design: 10 kgf/cm²
  • Coil length of the listed design: 100 m
350107nom. 32 mm / ID 31.8 mm
  • Nominal size: 32 mm
  • Inside diameter: 31.8 mm
  • Outside diameter: 47.0 mm
  • Reinforcement designation: 3B
  • Working pressure of the listed design: 7 kgf/cm²
  • Coil length of the listed design: 50 m
350108nom. 38 mm / ID 38.1 mm
  • Nominal size: 38 mm
  • Inside diameter: 38.1 mm
  • Outside diameter: 53.5 mm
  • Reinforcement designation: 3B
  • Working pressure of the listed design: 7 kgf/cm²
  • Coil length of the listed design: 50 m
350109nom. 50 mm / ID 50.8 mm
  • Nominal size: 50 mm
  • Inside diameter: 50.8 mm
  • Outside diameter: 71.0 mm
  • Reinforcement designation: 3B
  • Working pressure of the listed design: 7 kgf/cm²
  • Coil length of the listed design: 50 m

Rubber petroleum delivery hose

Quantity is in running metres. Fluid composition, temperature, continuous length and allowable pressure of the complete assembly are agreed for the enquiry.

IMPA codeConfigurationTechnical parameters
350431nom. ID 19 mm / 10 kgf/cm²
  • Nominal inside diameter: 19 mm
  • Approximate outside diameter: 28 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord
350432nom. ID 25 mm / 10 kgf/cm²
  • Nominal inside diameter: 25 mm
  • Approximate outside diameter: 35 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord
350433nom. ID 32 mm / 10 kgf/cm²
  • Nominal inside diameter: 32 mm
  • Approximate outside diameter: 42 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord
350434nom. ID 38 mm / 10 kgf/cm²
  • Nominal inside diameter: 38 mm
  • Approximate outside diameter: 49 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord
350435nom. ID 45 mm / 10 kgf/cm²
  • Nominal inside diameter: 45 mm
  • Approximate outside diameter: 56 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord
350436nom. ID 50 mm / 10 kgf/cm²
  • Nominal inside diameter: 50 mm
  • Approximate outside diameter: 62 mm
  • Working pressure of the listed design: 10 kgf/cm²
  • Reinforcement: Synthetic textile cord

Rubber petroleum suction and delivery hose

Order in running metres. Vacuum duty, fluid composition, temperature, length and connections are checked for the selected design; the hose pressure rating does not replace assembly verification.

IMPA codeConfigurationTechnical parameters
350441nom. 75 mm / ID 76.2 mm
  • Nominal size: 75 mm
  • Inside diameter: 76.2 mm
  • Outside diameter: 98.2 mm
  • Working pressure of the listed design: 7 kgf/cm²
350442nom. 100 mm / ID 101.6 mm
  • Nominal size: 100 mm
  • Inside diameter: 101.6 mm
  • Outside diameter: 129.0 mm
  • Working pressure of the listed design: 7 kgf/cm²
350443nom. 125 mm / ID 125.9 mm
  • Nominal size: 125 mm
  • Inside diameter: 125.9 mm
  • Outside diameter: 155.0 mm
  • Working pressure of the listed design: 7 kgf/cm²
350444nom. 150 mm / ID 151.0 mm
  • Nominal size: 150 mm
  • Inside diameter: 151.0 mm
  • Outside diameter: 183.0 mm
  • Working pressure of the listed design: 7 kgf/cm²
350445nom. 200 mm / ID 203.0 mm
  • Nominal size: 200 mm
  • Inside diameter: 203.0 mm
  • Outside diameter: 244.0 mm
  • Working pressure of the listed design: 7 kgf/cm²

Cast aluminium hose spray nozzle

Water flow is adjusted with a round handle. Select the hose-end size and design; attachment hardware is confirmed when ordering.

IMPA codeConfigurationTechnical parameters
3510049 and 15 mm
  • Hose-end size: 9 and 15 mm; adjustable hose end
  • Material: Cast aluminium
  • Flow adjustment: By round handle
35100525 mm
  • Hose-end size: 25 mm; fixed hose end
  • Material: Cast aluminium
  • Flow adjustment: By round handle

Pistol-grip hose spray nozzle

Handheld spray nozzle with squeeze-handle flow control. The hose end is 15 mm; pressure and attachment method are confirmed for the request.

IMPA codeConfigurationTechnical parameters
35100815 mm hose end
  • Hose-end size: 15 mm
  • Material: Chrome-finished brass
  • Flow control: Squeeze handle

Stainless quick-connect socket with male thread

A separate socket, without the mating plug. Coupling profile, pair compatibility, seal, fluid and working pressure are checked before ordering.

IMPA codeConfigurationTechnical parameters
351323Socket · male PT 3/8
  • Material: Stainless steel
  • Coupling element: Socket
  • Threaded end: Male PT 3/8
35132220SM · R1/4
  • Designation: 20SM
  • Size: R1/4
  • Material: Stainless steel
35132110SM · 1/8″
  • Designation: 10SM
  • Nominal male thread size: 1/8″
  • Material: Stainless steel
35132440SM · 1/2″
  • Designation: 40SM
  • Nominal male thread size: 1/2″
  • Material: Stainless steel
351325400SM · 1/2″
  • Designation: 400SM
  • Nominal male thread size: 1/2″
  • Material: Stainless steel
351326600SM · 3/4″
  • Designation: 600SM
  • Nominal male thread size: 3/4″
  • Material: Stainless steel
351327800SM · 1″
  • Designation: 800SM
  • Nominal male thread size: 1″
  • Material: Stainless steel

Stainless quick-connect sockets with SH hose tails

Socket for connecting an air hose. Specify the designation, hose diameter and mating plug profile.

IMPA codeConfigurationTechnical parameters
35122120SH · 1/4
  • Designation: 20SH
  • Size: 1/4
  • Material: Stainless steel
35122230SH · 3/8
  • Designation: 30SH
  • Size: 3/8
  • Material: Stainless steel
35122340SH · 1/2
  • Designation: 40SH
  • Size: 1/2
  • Material: Stainless steel
351224400SH · 1/2″
  • Designation: 400SH
  • Hose-tail size: 1/2″
  • Material: Stainless steel
351225600SH · 3/4″
  • Designation: 600SH
  • Hose-tail size: 3/4″
  • Material: Stainless steel
351226800SH · 1″
  • Designation: 800SH
  • Hose-tail size: 1″
  • Material: Stainless steel

Stainless quick-connect plugs with PH hose tails

Separate plug with a hose tail. Selection includes checking the socket profile and hose attachment.

IMPA codeConfigurationTechnical parameters
35125120PH · 1/4
  • Designation: 20PH
  • Size: 1/4
  • Material: Stainless steel
35125230PH · 3/8
  • Designation: 30PH
  • Size: 3/8
  • Material: Stainless steel
35125340PH · 1/2
  • Designation: 40PH
  • Size: 1/2
  • Material: Stainless steel
351254400PH · 1/2″
  • Designation: 400PH
  • Hose-tail size: 1/2″
  • Material: Stainless steel
351255600PH · 3/4″
  • Designation: 600PH
  • Hose-tail size: 3/4″
  • Material: Stainless steel
351256800PH · 1″
  • Designation: 800PH
  • Hose-tail size: 1″
  • Material: Stainless steel

Stainless quick-connect plugs with PM male threads

Plug for threaded equipment connection to a quick-connect socket. We check the mating profile and thread against the required configuration.

IMPA codeConfigurationTechnical parameters
35135220PM · R1/4
  • Designation: 20PM
  • Size: R1/4
  • Material: Stainless steel
35135330PM · R3/8
  • Designation: 30PM
  • Size: R3/8
  • Material: Stainless steel
35135110PM · 1/8″
  • Designation: 10PM
  • Nominal male thread size: 1/8″
  • Material: Stainless steel
35135440PM · 1/2″
  • Designation: 40PM
  • Nominal male thread size: 1/2″
  • Material: Stainless steel
351355400PM · 1/2″
  • Designation: 400PM
  • Nominal male thread size: 1/2″
  • Material: Stainless steel
351356600PM · 3/4″
  • Designation: 600PM
  • Nominal male thread size: 3/4″
  • Material: Stainless steel
351357800PM · 1″
  • Designation: 800PM
  • Nominal male thread size: 1″
  • Material: Stainless steel

PVC water suction and delivery hose

Hose for water suction and delivery lines. Operating conditions, temperature and vacuum rating are confirmed before supply.

IMPA codeConfigurationTechnical parameters
35017125 mm · 6 kgf/cm²
  • Inside diameter: 25 mm
  • Requested outside diameter: 30 mm
  • Material: PVC
  • Catalogue pressure designation: 6 kgf/cm²

SH hose-tail quick-connect socket · Steel

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35120120SH · 1/4″
  • Designation: 20SH
  • Hose-tail size: 1/4″
  • Material: Steel
35120230SH · 3/8″
  • Designation: 30SH
  • Hose-tail size: 3/8″
  • Material: Steel
35120340SH · 1/2″
  • Designation: 40SH
  • Hose-tail size: 1/2″
  • Material: Steel
351204400SH · 1/2″
  • Designation: 400SH
  • Hose-tail size: 1/2″
  • Material: Steel
351205600SH · 3/4″
  • Designation: 600SH
  • Hose-tail size: 3/4″
  • Material: Steel
351206800SH · 1″
  • Designation: 800SH
  • Hose-tail size: 1″
  • Material: Steel

SH hose-tail quick-connect socket · Brass

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35121120SH · 1/4″
  • Designation: 20SH
  • Hose-tail size: 1/4″
  • Material: Brass
35121230SH · 3/8″
  • Designation: 30SH
  • Hose-tail size: 3/8″
  • Material: Brass
35121340SH · 1/2″
  • Designation: 40SH
  • Hose-tail size: 1/2″
  • Material: Brass
351214400SH · 1/2″
  • Designation: 400SH
  • Hose-tail size: 1/2″
  • Material: Brass
351215600SH · 3/4″
  • Designation: 600SH
  • Hose-tail size: 3/4″
  • Material: Brass
351216800SH · 1″
  • Designation: 800SH
  • Hose-tail size: 1″
  • Material: Brass

PH hose-tail quick-connect plug · Steel

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35123120PH · 1/4″
  • Designation: 20PH
  • Hose-tail size: 1/4″
  • Material: Steel
35123230PH · 3/8″
  • Designation: 30PH
  • Hose-tail size: 3/8″
  • Material: Steel
35123340PH · 1/2″
  • Designation: 40PH
  • Hose-tail size: 1/2″
  • Material: Steel
351234400PH · 1/2″
  • Designation: 400PH
  • Hose-tail size: 1/2″
  • Material: Steel
351235600PH · 3/4″
  • Designation: 600PH
  • Hose-tail size: 3/4″
  • Material: Steel
351236800PH · 1″
  • Designation: 800PH
  • Hose-tail size: 1″
  • Material: Steel

PH hose-tail quick-connect plug · Brass

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35124120PH · 1/4″
  • Designation: 20PH
  • Hose-tail size: 1/4″
  • Material: Brass
35124230PH · 3/8″
  • Designation: 30PH
  • Hose-tail size: 3/8″
  • Material: Brass
35124340PH · 1/2″
  • Designation: 40PH
  • Hose-tail size: 1/2″
  • Material: Brass
351244400PH · 1/2″
  • Designation: 400PH
  • Hose-tail size: 1/2″
  • Material: Brass
351245600PH · 3/4″
  • Designation: 600PH
  • Hose-tail size: 3/4″
  • Material: Brass
351246800PH · 1″
  • Designation: 800PH
  • Hose-tail size: 1″
  • Material: Brass

SM male-thread quick-connect socket · Steel

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35130110SM · 1/8″
  • Designation: 10SM
  • Nominal male thread size: 1/8″
  • Material: Steel
35130220SM · 1/4″
  • Designation: 20SM
  • Nominal male thread size: 1/4″
  • Material: Steel
35130330SM · 3/8″
  • Designation: 30SM
  • Nominal male thread size: 3/8″
  • Material: Steel
35130440SM · 1/2″
  • Designation: 40SM
  • Nominal male thread size: 1/2″
  • Material: Steel
351305400SM · 1/2″
  • Designation: 400SM
  • Nominal male thread size: 1/2″
  • Material: Steel
351306600SM · 3/4″
  • Designation: 600SM
  • Nominal male thread size: 3/4″
  • Material: Steel
351307800SM · 1″
  • Designation: 800SM
  • Nominal male thread size: 1″
  • Material: Steel

SM male-thread quick-connect socket · Brass

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35131110SM · 1/8″
  • Designation: 10SM
  • Nominal male thread size: 1/8″
  • Material: Brass
35131220SM · 1/4″
  • Designation: 20SM
  • Nominal male thread size: 1/4″
  • Material: Brass
35131330SM · 3/8″
  • Designation: 30SM
  • Nominal male thread size: 3/8″
  • Material: Brass
35131440SM · 1/2″
  • Designation: 40SM
  • Nominal male thread size: 1/2″
  • Material: Brass
351315400SM · 1/2″
  • Designation: 400SM
  • Nominal male thread size: 1/2″
  • Material: Brass
351316600SM · 3/4″
  • Designation: 600SM
  • Nominal male thread size: 3/4″
  • Material: Brass
351317800SM · 1″
  • Designation: 800SM
  • Nominal male thread size: 1″
  • Material: Brass

PM male-thread quick-connect plug · Steel

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35133110PM · 1/8″
  • Designation: 10PM
  • Nominal male thread size: 1/8″
  • Material: Steel
35133220PM · 1/4″
  • Designation: 20PM
  • Nominal male thread size: 1/4″
  • Material: Steel
35133330PM · 3/8″
  • Designation: 30PM
  • Nominal male thread size: 3/8″
  • Material: Steel
35133440PM · 1/2″
  • Designation: 40PM
  • Nominal male thread size: 1/2″
  • Material: Steel
351335400PM · 1/2″
  • Designation: 400PM
  • Nominal male thread size: 1/2″
  • Material: Steel
351336600PM · 3/4″
  • Designation: 600PM
  • Nominal male thread size: 3/4″
  • Material: Steel
351337800PM · 1″
  • Designation: 800PM
  • Nominal male thread size: 1″
  • Material: Steel

PM male-thread quick-connect plug · Brass

Select material, coupling designation and connection size. We check the mating profile and service conditions when confirming the supply.

IMPA codeConfigurationTechnical parameters
35134110PM · 1/8″
  • Designation: 10PM
  • Nominal male thread size: 1/8″
  • Material: Brass
35134220PM · 1/4″
  • Designation: 20PM
  • Nominal male thread size: 1/4″
  • Material: Brass
35134330PM · 3/8″
  • Designation: 30PM
  • Nominal male thread size: 3/8″
  • Material: Brass
35134440PM · 1/2″
  • Designation: 40PM
  • Nominal male thread size: 1/2″
  • Material: Brass
351345400PM · 1/2″
  • Designation: 400PM
  • Nominal male thread size: 1/2″
  • Material: Brass
351346600PM · 3/4″
  • Designation: 600PM
  • Nominal male thread size: 3/4″
  • Material: Brass
351347800PM · 1″
  • Designation: 800PM
  • Nominal male thread size: 1″
  • Material: Brass

Industrial PVC hose with polyester braid

Transparent reinforced hose for equipment connections. Select inside and outside diameters; we check the medium, temperature and permitted duty for the offered execution.

IMPA codeConfigurationTechnical parameters
350321Ø4 × 9 mm
  • Inside diameter: 4 mm
  • Outside diameter: 9 mm
  • Catalogue pressure designation: 16 kgf/cm²
  • Material: PVC with polyester reinforcement
350322Ø6 × 11 mm
  • Inside diameter: 6 mm
  • Outside diameter: 11 mm
  • Catalogue pressure designation: 16 kgf/cm²
  • Material: PVC with polyester reinforcement
350323Ø8 × 13.5 mm
  • Inside diameter: 8 mm
  • Outside diameter: 13.5 mm
  • Catalogue pressure designation: 14 kgf/cm²
  • Material: PVC with polyester reinforcement
350324Ø9 × 15 mm
  • Inside diameter: 9 mm
  • Outside diameter: 15 mm
  • Catalogue pressure designation: 14 kgf/cm²
  • Material: PVC with polyester reinforcement
350325Ø10 × 16 mm
  • Inside diameter: 10 mm
  • Outside diameter: 16 mm
  • Catalogue pressure designation: 10 kgf/cm²
  • Material: PVC with polyester reinforcement
350326Ø12 × 18 mm
  • Inside diameter: 12 mm
  • Outside diameter: 18 mm
  • Catalogue pressure designation: 10 kgf/cm²
  • Material: PVC with polyester reinforcement
350327Ø15 × 22 mm
  • Inside diameter: 15 mm
  • Outside diameter: 22 mm
  • Catalogue pressure designation: 10 kgf/cm²
  • Material: PVC with polyester reinforcement
350328Ø19 × 26 mm
  • Inside diameter: 19 mm
  • Outside diameter: 26 mm
  • Catalogue pressure designation: 8 kgf/cm²
  • Material: PVC with polyester reinforcement
350329Ø25 × 33 mm
  • Inside diameter: 25 mm
  • Outside diameter: 33 mm
  • Catalogue pressure designation: 8 kgf/cm²
  • Material: PVC with polyester reinforcement
350330Ø32 × 41 mm
  • Inside diameter: 32 mm
  • Outside diameter: 41 mm
  • Catalogue pressure designation: 7 kgf/cm²
  • Material: PVC with polyester reinforcement
350331Ø38 × 48 mm
  • Inside diameter: 38 mm
  • Outside diameter: 48 mm
  • Catalogue pressure designation: 7 kgf/cm²
  • Material: PVC with polyester reinforcement
350332Ø50 × 62 mm
  • Inside diameter: 50 mm
  • Outside diameter: 62 mm
  • Catalogue pressure designation: 7 kgf/cm²
  • Material: PVC with polyester reinforcement
350333Ø63 × 80 mm
  • Inside diameter: 63 mm
  • Outside diameter: 80 mm
  • Catalogue pressure designation: 5 kgf/cm²
  • Material: PVC with polyester reinforcement
350334Ø75 × 92 mm
  • Inside diameter: 75 mm
  • Outside diameter: 92 mm
  • Catalogue pressure designation: 5 kgf/cm²
  • Material: PVC with polyester reinforcement

Twin welding hose 8×8 mm

Catalogue size 8×8 mm; quantity is measured in metres. Confirm both lines’ inside and outside diameters, gas compatibility, pressure, continuous length and end connections from the specific hose documentation.

IMPA codeConfigurationTechnical parameters
3501278×8 mm
  • Catalogue size: 8 × 8 mm
  • Construction: Two joined hose lines

SF female-thread quick-connect socket · steel

SF socket series with catalogue Rc female thread. 40SF and 400SF remain distinct despite the same nominal size; mating profile, seal and operating conditions require confirmation before supply.

IMPA codeConfigurationTechnical parameters
35140120SF · Rc 1/4
  • Designation: 20SF
  • Catalogue thread: Rc 1/4
  • Material: Steel
35140230SF · Rc 3/8
  • Designation: 30SF
  • Catalogue thread: Rc 3/8
  • Material: Steel
35140340SF · Rc 1/2
  • Designation: 40SF
  • Catalogue thread: Rc 1/2
  • Material: Steel
351404400SF · Rc 1/2
  • Designation: 400SF
  • Catalogue thread: Rc 1/2
  • Material: Steel
351405600SF · Rc 3/4
  • Designation: 600SF
  • Catalogue thread: Rc 3/4
  • Material: Steel
351406800SF · Rc 1
  • Designation: 800SF
  • Catalogue thread: Rc 1
  • Material: Steel

SF female-thread quick-connect socket · brass

SF socket series with catalogue Rc female thread. 40SF and 400SF remain distinct despite the same nominal size; mating profile, seal and operating conditions require confirmation before supply.

IMPA codeConfigurationTechnical parameters
35141120SF · Rc 1/4
  • Designation: 20SF
  • Catalogue thread: Rc 1/4
  • Material: Brass
35141230SF · Rc 3/8
  • Designation: 30SF
  • Catalogue thread: Rc 3/8
  • Material: Brass
35141340SF · Rc 1/2
  • Designation: 40SF
  • Catalogue thread: Rc 1/2
  • Material: Brass
351414400SF · Rc 1/2
  • Designation: 400SF
  • Catalogue thread: Rc 1/2
  • Material: Brass
351415600SF · Rc 3/4
  • Designation: 600SF
  • Catalogue thread: Rc 3/4
  • Material: Brass
351416800SF · Rc 1
  • Designation: 800SF
  • Catalogue thread: Rc 1
  • Material: Brass

SF female-thread quick-connect socket · stainless steel

SF socket series with catalogue Rc female thread. 40SF and 400SF remain distinct despite the same nominal size; mating profile, seal and operating conditions require confirmation before supply.

IMPA codeConfigurationTechnical parameters
35142120SF · Rc 1/4
  • Designation: 20SF
  • Catalogue thread: Rc 1/4
  • Material: Stainless steel
35142230SF · Rc 3/8
  • Designation: 30SF
  • Catalogue thread: Rc 3/8
  • Material: Stainless steel
35142340SF · Rc 1/2
  • Designation: 40SF
  • Catalogue thread: Rc 1/2
  • Material: Stainless steel
351424400SF · Rc 1/2
  • Designation: 400SF
  • Catalogue thread: Rc 1/2
  • Material: Stainless steel
351425600SF · Rc 3/4
  • Designation: 600SF
  • Catalogue thread: Rc 3/4
  • Material: Stainless steel
351426800SF · Rc 1
  • Designation: 800SF
  • Catalogue thread: Rc 1
  • Material: Stainless steel

Complete steam-hose coupling

Catalogue steam-hose couplings in the stated sizes. Material, thread size and profile, seal, assembly contents and allowable steam conditions are confirmed for the specific offer.

IMPA codeConfigurationTechnical parameters
35114519 mm · complete
  • Catalogue size: 19 mm
  • Configuration: Complete
35114625 mm · complete
  • Catalogue size: 25 mm
  • Configuration: Complete

Steam-hose coupling, BSP male thread

Catalogue steam-hose couplings in the stated sizes. Material, thread size and profile, seal, assembly contents and allowable steam conditions are confirmed for the specific offer.

IMPA codeConfigurationTechnical parameters
35115119 mm · BSP · Male thread
  • Catalogue size: 19 mm
  • Catalogue thread: BSP
  • Connection: Male thread
35115225 mm · BSP · Male thread
  • Catalogue size: 25 mm
  • Catalogue thread: BSP
  • Connection: Male thread
35115332 mm · BSP · Male thread
  • Catalogue size: 32 mm
  • Catalogue thread: BSP
  • Connection: Male thread
35115438 mm · BSP · Male thread
  • Catalogue size: 38 mm
  • Catalogue thread: BSP
  • Connection: Male thread
35115550 mm · BSP · Male thread
  • Catalogue size: 50 mm
  • Catalogue thread: BSP
  • Connection: Male thread

Steam-hose coupling, BSP female thread

Catalogue steam-hose couplings in the stated sizes. Material, thread size and profile, seal, assembly contents and allowable steam conditions are confirmed for the specific offer.

IMPA codeConfigurationTechnical parameters
35115619 mm · BSP · Female thread
  • Catalogue size: 19 mm
  • Catalogue thread: BSP
  • Connection: Female thread
35115725 mm · BSP · Female thread
  • Catalogue size: 25 mm
  • Catalogue thread: BSP
  • Connection: Female thread
35115832 mm · BSP · Female thread
  • Catalogue size: 32 mm
  • Catalogue thread: BSP
  • Connection: Female thread
35115938 mm · BSP · Female thread
  • Catalogue size: 38 mm
  • Catalogue thread: BSP
  • Connection: Female thread
35116050 mm · BSP · Female thread
  • Catalogue size: 50 mm
  • Catalogue thread: BSP
  • Connection: Female thread

Lock-type air-hose coupling, cast brass

Lock-type connection with air-hose tails. The catalogue unit is a set; set contents, mating size, seals and operating conditions are confirmed in the offer.

IMPA codeConfigurationTechnical parameters
3510119 mm · set
  • Hose-tail size: 9 mm
  • Material: Cast brass
  • Connection: Lock-type
35101212 mm · set
  • Hose-tail size: 12 mm
  • Material: Cast brass
  • Connection: Lock-type
35101319 mm · set
  • Hose-tail size: 19 mm
  • Material: Cast brass
  • Connection: Lock-type
35101425 mm · set
  • Hose-tail size: 25 mm
  • Material: Cast brass
  • Connection: Lock-type

Quick-connect coupler S-A · Steel

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515011S-A · RC-1/8
  • Catalogue designation: 1S-A
  • Catalogue thread designation: RC-1/8
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515022S-A · RC-1/4
  • Catalogue designation: 2S-A
  • Catalogue thread designation: RC-1/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515033S-A · RC-3/8
  • Catalogue designation: 3S-A
  • Catalogue thread designation: RC-3/8
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515044S-A · RC-1/2
  • Catalogue designation: 4S-A
  • Catalogue thread designation: RC-1/2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515056S-A · RC-3/4
  • Catalogue designation: 6S-A
  • Catalogue thread designation: RC-3/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515068S-A · RC-1
  • Catalogue designation: 8S-A
  • Catalogue thread designation: RC-1
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35150710S-A · RC-1-1/4
  • Catalogue designation: 10S-A
  • Catalogue thread designation: RC-1-1/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35150812S-A · RC-1-1/2
  • Catalogue designation: 12S-A
  • Catalogue thread designation: RC-1-1/2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35150916S-A · RC-2
  • Catalogue designation: 16S-A
  • Catalogue thread designation: RC-2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Quick-connect coupler S-A · Brass

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515111S-A · RC-1/8
  • Catalogue designation: 1S-A
  • Catalogue thread designation: RC-1/8
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515122S-A · RC-1/4
  • Catalogue designation: 2S-A
  • Catalogue thread designation: RC-1/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515133S-A · RC-3/8
  • Catalogue designation: 3S-A
  • Catalogue thread designation: RC-3/8
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515144S-A · RC-1/2
  • Catalogue designation: 4S-A
  • Catalogue thread designation: RC-1/2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515156S-A · RC-3/4
  • Catalogue designation: 6S-A
  • Catalogue thread designation: RC-3/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515168S-A · RC-1
  • Catalogue designation: 8S-A
  • Catalogue thread designation: RC-1
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35151710S-A · RC-1-1/4
  • Catalogue designation: 10S-A
  • Catalogue thread designation: RC-1-1/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35151812S-A · RC-1-1/2
  • Catalogue designation: 12S-A
  • Catalogue thread designation: RC-1-1/2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35151916S-A · RC-2
  • Catalogue designation: 16S-A
  • Catalogue thread designation: RC-2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Quick-connect coupler S-A/SA · Stainless steel

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515211S-A · RC-1/8
  • Catalogue designation: 1S-A
  • Catalogue thread designation: RC-1/8
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515222S-A · RC-1/4
  • Catalogue designation: 2S-A
  • Catalogue thread designation: RC-1/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515233S-A · RC-3/8
  • Catalogue designation: 3S-A
  • Catalogue thread designation: RC-3/8
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515244S-A · RC-1/2
  • Catalogue designation: 4S-A
  • Catalogue thread designation: RC-1/2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515256SA · RC-3/4
  • Catalogue designation: 6SA
  • Catalogue thread designation: RC-3/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515268SA · RC-1
  • Catalogue designation: 8SA
  • Catalogue thread designation: RC-1
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35152710SA · RC-1-1/4
  • Catalogue designation: 10SA
  • Catalogue thread designation: RC-1-1/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35152812SA · RC-1-1/2
  • Catalogue designation: 12SA
  • Catalogue thread designation: RC-1-1/2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35152916SA · RC-2
  • Catalogue designation: 16SA
  • Catalogue thread designation: RC-2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Quick-connect coupler P-A · Steel

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515311P-A · RC-1/8
  • Catalogue designation: 1P-A
  • Catalogue thread designation: RC-1/8
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515322P-A · RC-1/4
  • Catalogue designation: 2P-A
  • Catalogue thread designation: RC-1/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515333P-A · RC-3/8
  • Catalogue designation: 3P-A
  • Catalogue thread designation: RC-3/8
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515344P-A · RC-1/2
  • Catalogue designation: 4P-A
  • Catalogue thread designation: RC-1/2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515356P-A · RC-3/4
  • Catalogue designation: 6P-A
  • Catalogue thread designation: RC-3/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515368P-A · RC-1
  • Catalogue designation: 8P-A
  • Catalogue thread designation: RC-1
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35153710P-A · RC-1-1/4
  • Catalogue designation: 10P-A
  • Catalogue thread designation: RC-1-1/4
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35153812P-A · RC-1-1/2
  • Catalogue designation: 12P-A
  • Catalogue thread designation: RC-1-1/2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35153916P-A · RC-2
  • Catalogue designation: 16P-A
  • Catalogue thread designation: RC-2
  • Material: Steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Quick-connect coupler P-A · Brass

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515411P-A · RC-1/8
  • Catalogue designation: 1P-A
  • Catalogue thread designation: RC-1/8
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515422P-A · RC-1/4
  • Catalogue designation: 2P-A
  • Catalogue thread designation: RC-1/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515433P-A · RC-3/8
  • Catalogue designation: 3P-A
  • Catalogue thread designation: RC-3/8
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515444P-A · RC-1/2
  • Catalogue designation: 4P-A
  • Catalogue thread designation: RC-1/2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515456P-A · RC-3/4
  • Catalogue designation: 6P-A
  • Catalogue thread designation: RC-3/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515468P-A · RC-1
  • Catalogue designation: 8P-A
  • Catalogue thread designation: RC-1
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35154710P-A · RC-1-1/4
  • Catalogue designation: 10P-A
  • Catalogue thread designation: RC-1-1/4
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35154812P-A · RC-1-1/2
  • Catalogue designation: 12P-A
  • Catalogue thread designation: RC-1-1/2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35154916P-A · RC-2
  • Catalogue designation: 16P-A
  • Catalogue thread designation: RC-2
  • Material: Brass
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Quick-connect coupler P-A · Stainless steel

Each execution retains its catalogue connection marking. Confirm supply contents, seals, fluid and operating conditions, and mating-profile compatibility for the offered parts.

IMPA codeConfigurationTechnical parameters
3515511P-A · RC-1/8
  • Catalogue designation: 1P-A
  • Catalogue thread designation: RC-1/8
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515522P-A · PRC1/4
  • Catalogue designation: 2P-A
  • Catalogue marking (thread unconfirmed): PRC1/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515533P-A · RC-3/8
  • Catalogue designation: 3P-A
  • Catalogue thread designation: RC-3/8
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515544P-A · RC-1/2
  • Catalogue designation: 4P-A
  • Catalogue thread designation: RC-1/2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515556P-A · RC-3/4
  • Catalogue designation: 6P-A
  • Catalogue thread designation: RC-3/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
3515568P-A · RC-1
  • Catalogue designation: 8P-A
  • Catalogue thread designation: RC-1
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35155710P-A · RC-1-1/4
  • Catalogue designation: 10P-A
  • Catalogue thread designation: RC-1-1/4
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35155812P-A · RC-1-1/2
  • Catalogue designation: 12P-A
  • Catalogue thread designation: RC-1-1/2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff
35155916P-A · RC-2
  • Catalogue designation: 16P-A
  • Catalogue thread designation: RC-2
  • Material: Stainless steel
  • Connection type: Quick-connect
  • Catalogue series class: Double-end shutoff

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiryContacts