ХАЛЛ ГРУПП · Equipment catalogue

SDR-120-24 DIN-rail power supply

Industrial 24 V power supply for automation circuits. Rated output is 5 A, 120 W; a 180 W peak is permitted for no more than 3 seconds according to the manufacturer curves. DIN-rail mounting, natural convection cooling and a DC OK contact. Price, lead time and supplier stock are confirmed per enquiry.

Open selection and send an enquiry client@hallgroup.ru

Technical parameters

Rated output: 24 V DC / 5 A / 120 W
AC input range: 88–264 V AC
DC input range: 124–370 V DC
AC frequency range: 47–63 Hz
Output voltage adjustment: 24–28 V DC
Efficiency, typical: 91%
Short-time peak load: 180 W / 7.5 A / ≤3 s
Dimensions W×H×D: 40×125.2×113.5 mm
Data-sheet mass: 0.67 kg
Mounting rail: TS35/7.5 or TS35/15
Temperature subject to derating: −25…+70 °C

Configurations and specifications

Configuration	Technical parameters	IMPA correspondence
SDR-120-24 · 24 V / 5 A		A direct IMPA code is not confirmed

Selection and applicability

Derate the load at low input voltage and high temperature according to the manufacturer curves. Before replacement, verify supply, terminals, mounting and panel requirements. The 180 W peak is not a continuous rating. No exact IMPA code is verified.

Photographs and drawings

**SDR-120-24 — manufacturer catalogue photograph**Native photograph from the SDR-120 data sheet dated 9 June 2025. The housing label reads SDR-120-24. Original pixels and markings are preserved. This is a catalogue photograph, not evidence of a particular delivery or stock quantity.

**SDR-120 — case 992A dimensions and diagram**Manufacturer sheet for the SDR-120 series, applicable to SDR-120-24. W×H×D: 40×125.2×113.5 mm; the sheet gives ±1 mm tolerance. Mounting on TS35/7.5 or TS35/15. Terminals and circuit are shown by the manufacturer; connect in accordance with the agreed panel documentation.

Include with your enquiry

Exact designation, wiring and existing-system compatibility
Supply, signals, load and required protection functions
Mounting, temperature, cooling conditions and required documentation

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiry Contacts