ХАЛЛ ГРУПП · Equipment catalogue

SPECK CY-4281-MK-HT magnetically coupled regenerative turbine pump

Magnetically coupled regenerative turbine pump for circulation and process loops. Select hydraulics, materials and motor for the medium, required flow and head. Mass depends on motor, materials and configuration. Lettered dimensions are in mm; “–” preserves an unstated table value. The 50/60 Hz plots show hydraulic alternatives and do not replace duty-point verification.

Open selection and send an enquiry client@hallgroup.ru

Technical parameters

Ratings and geometry source: SPECK 1096.1088 / 03/2018 / p.28
Source check: 2026-11-07
Casing material in selected sheet: 1.4581

Configurations and specifications

Configuration	Technical parameters	IMPA correspondence
71 · 1.0 kW / 50 Hz · SAE 3/4	Motor frame in sheet: 71 Tabulated phases; agree supply: 3~ Frequency and speed — 50 Hz: 50 Hz / 2800 min⁻¹ Motor power — 50 Hz: 1.0 kW Frequency and speed — 60 Hz: 60 Hz / 3400 min⁻¹ Motor power — 60 Hz: 1.0 kW Suction / discharge connection: SAE 3/4 / SAE 3/4 Magnetic-coupling torque in table: 7 Nm Catalogue mass: 15.0 kg *Ue: drainage / plug, on request: G 1/8 Sheet maximum water temperature: 220 °C Drawing: A: 112 mm Drawing: AB: 135 mm Drawing: B: 90 mm Drawing: BB: 110 mm Drawing: H: 71 mm Drawing: HA: 8 mm Drawing: HD: 175 mm Drawing: K: 9 mm Drawing: LB¹: 211 mm Drawing: h3: 155 mm Drawing: o²: – Drawing: w: 178 mm Drawing: z¹:** 367 mm	A direct IMPA code is not confirmed
80 · 1.5 kW / 50 Hz · SAE 3/4	Motor frame in sheet: 80 Tabulated phases; agree supply: 3~ Frequency and speed — 50 Hz: 50 Hz / 2800 min⁻¹ Motor power — 50 Hz: 1.5 kW Frequency and speed — 60 Hz: 60 Hz / 3400 min⁻¹ Motor power — 60 Hz: 1.5 kW Suction / discharge connection: SAE 3/4 / SAE 3/4 Magnetic-coupling torque in table: 7 Nm Catalogue mass: 18.5 kg *Ue: drainage / plug, on request: G 1/8 Sheet maximum water temperature: 220 °C Drawing: A: 125 mm Drawing: AB: 153 mm Drawing: B: 100 mm Drawing: BB: 125 mm Drawing: H: 80 mm Drawing: HA: 10 mm Drawing: HD: 194 mm Drawing: K: 9 mm Drawing: LB¹: 240 mm Drawing: h3: 164 mm Drawing: o²: 10 mm Drawing: w: 191 mm Drawing: z¹:** 414 mm	A direct IMPA code is not confirmed
90 · 2.2 kW / 50 Hz · SAE 3/4	Motor frame in sheet: 90 Tabulated phases; agree supply: 3~ Frequency and speed — 50 Hz: 50 Hz / 2800 min⁻¹ Motor power — 50 Hz: 2.2 kW Frequency and speed — 60 Hz: 60 Hz / 3400 min⁻¹ Motor power — 60 Hz: 2.2 kW Suction / discharge connection: SAE 3/4 / SAE 3/4 Magnetic-coupling torque in table: 10 Nm Catalogue mass: 19.5 kg *Ue: drainage / plug, on request: G 1/8 Sheet maximum water temperature: 220 °C Drawing: A: 140 mm Drawing: AB: 170 mm Drawing: B: 125 mm Drawing: BB: 155 mm Drawing: H: 90 mm Drawing: HA: 13 mm Drawing: HD: 209 mm Drawing: K: 10 mm Drawing: LB¹: 281 mm Drawing: h3: 174 mm Drawing: o²: 14 mm Drawing: w: 206 mm Drawing: z¹:** 444 mm	A direct IMPA code is not confirmed

Selection and applicability

Ratings and geometry follow factory sheet 28, SPECK 1096.1088, printed revision 03/2018. This is an archived catalogue configuration; confirm the current article, materials, motor, supply, duty point and availability before order. SPECK’s current official site announces the transition to Circutec; newer-document ratings are not applied to this edition. No exact IMPA code is confirmed. LB¹ and z¹ depend on motor design; o² is stated for a Ø120 motor flange.

Photographs and drawings

**CY-4281-MK-HT — dimensional drawing**Factory sheet 28, SPECK 1096.1088. Lettered dimensions follow the selected execution table. This is not the agreed installation drawing for a specific delivery.

**CY-4281-MK-HT — 50/60 Hz characteristic curves**Factory sheet 29, SPECK 1096.1088. Curves for water at 20°C and nominal speed: head/flow tolerance ±10%; power tolerance +10%. Confirm motor and hydraulics at the duty point; chart limits are not simultaneous Q/H ratings.

Include with your enquiry

Fluid, temperature, viscosity and solids
Flow and pressure at the duty point; operating cycle
Materials, seals, threads and available power or compressed air

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiry Contacts