ХАЛЛ ГРУПП · Equipment catalogue

Speck CY-6091-MK-TOE pump with electric motor

The designation is documented in ХАЛЛ ГРУПП supply experience. Configuration, scope of supply and application suitability are checked for each new order.

Open selection and send an enquiry client@hallgroup.ru

Technical parameters

Pump type: Regenerative turbine pump with magnetic coupling
Casing material: EN-GJS-500-7
Impeller material: 1.4408
Shaft material: Ceramics
Separating-can material: 1.4571

Configurations and specifications

Configuration	Technical parameters	IMPA correspondence
Speck CY-6091-MK-TOE		A direct IMPA code is not confirmed
CY-6091-MK-TOE · 90L · Q80 · G 3/4 · z¹ 501 mm	Motor frame: 90L Hydraulic configuration: Q 80 Table-listed flow: 80 L/min Suction / discharge connections: G 3/4 / G 3/4 Oil temperature limit by connection: 180 °C Motor power at 50 / 60 Hz: 2.80 kW / 2.80 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 33 kg Table Nm value: 14 Nm AD¹ on drawing: 147 mm LB¹ on drawing: 280 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: — w on drawing: 80 mm z¹ on drawing: 501 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 90L · Q80 · SAE 1 · z¹ 501 mm	Motor frame: 90L Hydraulic configuration: Q 80 Table-listed flow: 80 L/min Suction / discharge connections: SAE 1 / SAE 1 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 2.80 kW / 2.80 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 33 kg Table Nm value: 14 Nm AD¹ on drawing: 147 mm LB¹ on drawing: 280 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: — w on drawing: 80 mm z¹ on drawing: 501 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 100L · Q150 · G 3/4 · z¹ 537 mm	Motor frame: 100L Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: G 3/4 / G 3/4 Oil temperature limit by connection: 180 °C Motor power at 50 / 60 Hz: 3.00 kW / 3.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 36 kg Table Nm value: 14 Nm AD¹ on drawing: 154 mm LB¹ on drawing: 306 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: 10 mm w on drawing: 80 mm z¹ on drawing: 537 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 100L · Q150 · SAE 1 · z¹ 537 mm	Motor frame: 100L Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: SAE 1 / SAE 1 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 3.00 kW / 3.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 36 kg Table Nm value: 14 Nm AD¹ on drawing: 154 mm LB¹ on drawing: 306 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: 10 mm w on drawing: 80 mm z¹ on drawing: 537 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 100L · Q150 · G 3/4 · z¹ 559 mm	Motor frame: 100L Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: G 3/4 / G 3/4 Oil temperature limit by connection: 180 °C Motor power at 50 / 60 Hz: 3.00 kW / 3.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 36 kg Table Nm value: 22 Nm AD¹ on drawing: 154 mm LB¹ on drawing: 306 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: 32 mm w on drawing: 80 mm z¹ on drawing: 559 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 100L · Q150 · SAE 1 · z¹ 559 mm	Motor frame: 100L Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: SAE 1 / SAE 1 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 3.00 kW / 3.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 36 kg Table Nm value: 22 Nm AD¹ on drawing: 154 mm LB¹ on drawing: 306 mm h1 on drawing: 100 mm h3 on drawing: 200 mm h5 on drawing: 138 mm m1 on drawing: 110 mm m2 on drawing: 70 mm n1 on drawing: 130 mm o¹ on drawing: 32 mm w on drawing: 80 mm z¹ on drawing: 559 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 112M · Q150 · G 3/4 · z¹ 578 mm	Motor frame: 112M Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: G 3/4 / G 3/4 Oil temperature limit by connection: 180 °C Motor power at 50 / 60 Hz: 4.00 kW / 4.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 46 kg Table Nm value: 22 Nm AD¹ on drawing: 167 mm LB¹ on drawing: 296 mm h1 on drawing: 114 mm h3 on drawing: 214 mm h5 on drawing: 138 mm m1 on drawing: 145 mm m2 on drawing: 80 mm n1 on drawing: 140 mm o¹ on drawing: — w on drawing: 90 mm z¹ on drawing: 578 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 112M · Q150 · SAE 1 · z¹ 578 mm	Motor frame: 112M Hydraulic configuration: Q 150 Table-listed flow: 150 L/min Suction / discharge connections: SAE 1 / SAE 1 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 4.00 kW / 4.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 46 kg Table Nm value: 22 Nm AD¹ on drawing: 167 mm LB¹ on drawing: 296 mm h1 on drawing: 114 mm h3 on drawing: 214 mm h5 on drawing: 138 mm m1 on drawing: 145 mm m2 on drawing: 80 mm n1 on drawing: 140 mm o¹ on drawing: — w on drawing: 90 mm z¹ on drawing: 578 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 112M · Q200 · SAE 1 1/4 · z¹ 582 mm	Motor frame: 112M Hydraulic configuration: Q 200 Table-listed flow: 200 L/min Suction / discharge connections: SAE 1 1/4 / SAE 1 1/4 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 4.00 kW / 4.00 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 46 kg Table Nm value: 22 Nm AD¹ on drawing: 167 mm LB¹ on drawing: 296 mm h1 on drawing: 114 mm h3 on drawing: 214 mm h5 on drawing: 143 mm m1 on drawing: 145 mm m2 on drawing: 80 mm n1 on drawing: 140 mm o¹ on drawing: — w on drawing: 90 mm z¹ on drawing: 582 mm	A direct IMPA code is not confirmed
CY-6091-MK-TOE · 132S · Q200 · SAE 1 1/4 · z¹ 739 mm	Motor frame: 132S Hydraulic configuration: Q 200 Table-listed flow: 200 L/min Suction / discharge connections: SAE 1 1/4 / SAE 1 1/4 Oil temperature limit by connection: 350 °C Motor power at 50 / 60 Hz: 5.50 kW / 5.50 kW Phases: 3~ Speed at 50 / 60 Hz: 2800 / 3400 r/min Table-listed assembly mass: 70 kg Table Nm value: 22 Nm AD¹ on drawing: 221 mm LB¹ on drawing: 457 mm h1 on drawing: 114 mm h3 on drawing: 214 mm h5 on drawing: 143 mm m1 on drawing: 145 mm m2 on drawing: 80 mm n1 on drawing: 140 mm o¹ on drawing: 20 mm w on drawing: 90 mm z¹ on drawing: 739 mm	A direct IMPA code is not confirmed

Selection and applicability

Configurations and dimensions follow the CY-6091-MK-TOE factory table (03/2018); connections and temperature limits were cross-checked against the Speck 04/2025 brochure. Motor dimensions refer to IE2; voltage, IE3, duty point and final package are agreed before ordering. No six-digit IMPA code is confirmed for this model.

Photographs and drawings

**CY-6091-MK-TOE — factory product view**Factory illustration for CY-6091-MK-HT/TOE. Motor appearance and connections are agreed for the selected configuration.

**CY-6091-MK-TOE — dimensional drawing**CY-6091-MK-TOE drawing; lettered dimensions are listed for the selected configuration. Source motor dimensions refer to IE2.

**CY-6091-MK-TOE — sectional view**CY-6091-MK-TOE sectional view from the factory catalogue with component item numbers.

**CY-6091-MK-TOE — 50 / 60 Hz curves**Test medium: water at 20 °C. Oil duty curves depend on fluid properties; the source specifies adapted hydraulics at 60 Hz.

Include with your enquiry

Fluid, temperature, viscosity and solids
Flow and pressure at the duty point; operating cycle
Materials, seals, threads and available power or compressed air

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiry Contacts