Skip to content
RUEN中文
  1. Home
  2. Equipment catalogue
  3. IMPA pneumatic equipment, tools and drives

ХАЛЛ ГРУПП · Equipment catalogue

IMPA pneumatic equipment, tools and drives

Pneumatic impact wrenches and sockets, drills, grinders, chipping and scaling hammers, chisels and air motors. Drives have a separate subsection in group59. Pumps and pressure washers have their own sections.

Open selection and send an enquiryclient@hallgroup.ru

Include with your enquiry

  • Air pressure and consumption, power, speed and required torque
  • Drive mounting and shaft, rotation and duty
  • For accessories: tool model, mounting dimensions and drawing; a code does not guarantee compatibility

Models and configurations

This is a ХАЛЛ ГРУПП selection, not the complete official IMPA Marine Stores Guide database. A code does not replace a technical specification; the identity of a particular model and execution is checked separately.

Pneumatic impact wrench

Air-powered tool for assembly and removal of threaded fasteners. Catalogue bolt capacity and square-drive size are listed separately. Torque, air consumption, impact rate and scope of supply are agreed for the offered model. Sockets and air hose are selected separately.

IMPA codeConfigurationTechnical parameters
590101Bolt capacity 13 mm / square 12.7 mm
  • Catalogue bolt capacity: 13 mm
  • Square-drive size: 12.7 mm
  • Drive: Pneumatic
590102Bolt capacity 16 mm / square 15.9 mm
  • Catalogue bolt capacity: 16 mm
  • Square-drive size: 15.9 mm
  • Drive: Pneumatic
590105Bolt capacity 22 mm / square 19 mm
  • Catalogue bolt capacity: 22 mm
  • Square-drive size: 19 mm
  • Drive: Pneumatic
590106Bolt capacity 32 mm / square 25.4 mm
  • Catalogue bolt capacity: 32 mm
  • Square-drive size: 25.4 mm
  • Drive: Pneumatic
590107Bolt capacity 38 mm / square 31.8 mm
  • Catalogue bolt capacity: 38 mm
  • Square-drive size: 31.8 mm
  • Drive: Pneumatic
590108Bolt capacity 56 mm / square 38.1 mm
  • Catalogue bolt capacity: 56 mm
  • Square-drive size: 38.1 mm
  • Drive: Pneumatic
590109Bolt capacity 76 mm / square 44.45 mm
  • Catalogue bolt capacity: 76 mm
  • Square-drive size: 44.45 mm
  • Drive: Pneumatic

Six-point impact socket — 9.5 mm square

Six-point socket for impact-powered fastening. Square-drive size and opening size are listed separately. Length, wall thickness, retention system and compatibility with the selected wrench are confirmed before ordering.

IMPA codeConfigurationTechnical parameters
590201Square 9.5 mm / opening 6 mm
  • Square-drive size: 9.5 mm
  • Opening size: 6 mm
  • Socket profile: Six-point
590202Square 9.5 mm / opening 7 mm
  • Square-drive size: 9.5 mm
  • Opening size: 7 mm
  • Socket profile: Six-point
590203Square 9.5 mm / opening 8 mm
  • Square-drive size: 9.5 mm
  • Opening size: 8 mm
  • Socket profile: Six-point
590204Square 9.5 mm / opening 9 mm
  • Square-drive size: 9.5 mm
  • Opening size: 9 mm
  • Socket profile: Six-point
590205Square 9.5 mm / opening 10 mm
  • Square-drive size: 9.5 mm
  • Opening size: 10 mm
  • Socket profile: Six-point
590206Square 9.5 mm / opening 11 mm
  • Square-drive size: 9.5 mm
  • Opening size: 11 mm
  • Socket profile: Six-point
590207Square 9.5 mm / opening 13 mm
  • Square-drive size: 9.5 mm
  • Opening size: 13 mm
  • Socket profile: Six-point
590208Square 9.5 mm / opening 14 mm
  • Square-drive size: 9.5 mm
  • Opening size: 14 mm
  • Socket profile: Six-point
590209Square 9.5 mm / opening 17 mm
  • Square-drive size: 9.5 mm
  • Opening size: 17 mm
  • Socket profile: Six-point
590210Square 9.5 mm / opening 19 mm
  • Square-drive size: 9.5 mm
  • Opening size: 19 mm
  • Socket profile: Six-point
590211Square 9.5 mm / opening 21 mm
  • Square-drive size: 9.5 mm
  • Opening size: 21 mm
  • Socket profile: Six-point
590212Square 9.5 mm / opening 22 mm
  • Square-drive size: 9.5 mm
  • Opening size: 22 mm
  • Socket profile: Six-point

Six-point impact socket — 12.7 mm square

Six-point socket for impact-powered fastening. Square-drive size and opening size are listed separately. Length, wall thickness, retention system and compatibility with the selected wrench are confirmed before ordering.

IMPA codeConfigurationTechnical parameters
590213Square 12.7 mm / opening 10 mm
  • Square-drive size: 12.7 mm
  • Opening size: 10 mm
  • Socket profile: Six-point
590214Square 12.7 mm / opening 11 mm
  • Square-drive size: 12.7 mm
  • Opening size: 11 mm
  • Socket profile: Six-point
590215Square 12.7 mm / opening 12 mm
  • Square-drive size: 12.7 mm
  • Opening size: 12 mm
  • Socket profile: Six-point
590216Square 12.7 mm / opening 13 mm
  • Square-drive size: 12.7 mm
  • Opening size: 13 mm
  • Socket profile: Six-point
590217Square 12.7 mm / opening 14 mm
  • Square-drive size: 12.7 mm
  • Opening size: 14 mm
  • Socket profile: Six-point
590218Square 12.7 mm / opening 17 mm
  • Square-drive size: 12.7 mm
  • Opening size: 17 mm
  • Socket profile: Six-point
590219Square 12.7 mm / opening 19 mm
  • Square-drive size: 12.7 mm
  • Opening size: 19 mm
  • Socket profile: Six-point
590220Square 12.7 mm / opening 21 mm
  • Square-drive size: 12.7 mm
  • Opening size: 21 mm
  • Socket profile: Six-point
590221Square 12.7 mm / opening 22 mm
  • Square-drive size: 12.7 mm
  • Opening size: 22 mm
  • Socket profile: Six-point
590222Square 12.7 mm / opening 23 mm
  • Square-drive size: 12.7 mm
  • Opening size: 23 mm
  • Socket profile: Six-point
590223Square 12.7 mm / opening 24 mm
  • Square-drive size: 12.7 mm
  • Opening size: 24 mm
  • Socket profile: Six-point
590224Square 12.7 mm / opening 26 mm
  • Square-drive size: 12.7 mm
  • Opening size: 26 mm
  • Socket profile: Six-point
590225Square 12.7 mm / opening 27 mm
  • Square-drive size: 12.7 mm
  • Opening size: 27 mm
  • Socket profile: Six-point
590226Square 12.7 mm / opening 29 mm
  • Square-drive size: 12.7 mm
  • Opening size: 29 mm
  • Socket profile: Six-point
590227Square 12.7 mm / opening 30 mm
  • Square-drive size: 12.7 mm
  • Opening size: 30 mm
  • Socket profile: Six-point
590228Square 12.7 mm / opening 32 mm
  • Square-drive size: 12.7 mm
  • Opening size: 32 mm
  • Socket profile: Six-point

Six-point impact socket — 19 mm square

Six-point socket for impact-powered fastening. Square-drive size and opening size are listed separately. Length, wall thickness, retention system and compatibility with the selected wrench are confirmed before ordering.

IMPA codeConfigurationTechnical parameters
590229Square 19 mm / opening 17 mm
  • Square-drive size: 19 mm
  • Opening size: 17 mm
  • Socket profile: Six-point
590230Square 19 mm / opening 19 mm
  • Square-drive size: 19 mm
  • Opening size: 19 mm
  • Socket profile: Six-point
590231Square 19 mm / opening 21 mm
  • Square-drive size: 19 mm
  • Opening size: 21 mm
  • Socket profile: Six-point
590232Square 19 mm / opening 22 mm
  • Square-drive size: 19 mm
  • Opening size: 22 mm
  • Socket profile: Six-point
590233Square 19 mm / opening 23 mm
  • Square-drive size: 19 mm
  • Opening size: 23 mm
  • Socket profile: Six-point
590234Square 19 mm / opening 24 mm
  • Square-drive size: 19 mm
  • Opening size: 24 mm
  • Socket profile: Six-point
590235Square 19 mm / opening 26 mm
  • Square-drive size: 19 mm
  • Opening size: 26 mm
  • Socket profile: Six-point
590236Square 19 mm / opening 27 mm
  • Square-drive size: 19 mm
  • Opening size: 27 mm
  • Socket profile: Six-point
590237Square 19 mm / opening 29 mm
  • Square-drive size: 19 mm
  • Opening size: 29 mm
  • Socket profile: Six-point
590238Square 19 mm / opening 30 mm
  • Square-drive size: 19 mm
  • Opening size: 30 mm
  • Socket profile: Six-point
590239Square 19 mm / opening 32 mm
  • Square-drive size: 19 mm
  • Opening size: 32 mm
  • Socket profile: Six-point
590240Square 19 mm / opening 35 mm
  • Square-drive size: 19 mm
  • Opening size: 35 mm
  • Socket profile: Six-point
590241Square 19 mm / opening 36 mm
  • Square-drive size: 19 mm
  • Opening size: 36 mm
  • Socket profile: Six-point
590242Square 19 mm / opening 38 mm
  • Square-drive size: 19 mm
  • Opening size: 38 mm
  • Socket profile: Six-point
590243Square 19 mm / opening 41 mm
  • Square-drive size: 19 mm
  • Opening size: 41 mm
  • Socket profile: Six-point
590244Square 19 mm / opening 46 mm
  • Square-drive size: 19 mm
  • Opening size: 46 mm
  • Socket profile: Six-point
590245Square 19 mm / opening 50 mm
  • Square-drive size: 19 mm
  • Opening size: 50 mm
  • Socket profile: Six-point

Six-point impact socket — 25.4 mm square

Six-point socket for impact-powered fastening. Square-drive size and opening size are listed separately. Length, wall thickness, retention system and compatibility with the selected wrench are confirmed before ordering.

IMPA codeConfigurationTechnical parameters
590246Square 25.4 mm / opening 17 mm
  • Square-drive size: 25.4 mm
  • Opening size: 17 mm
  • Socket profile: Six-point
590247Square 25.4 mm / opening 19 mm
  • Square-drive size: 25.4 mm
  • Opening size: 19 mm
  • Socket profile: Six-point
590248Square 25.4 mm / opening 21 mm
  • Square-drive size: 25.4 mm
  • Opening size: 21 mm
  • Socket profile: Six-point
590249Square 25.4 mm / opening 22 mm
  • Square-drive size: 25.4 mm
  • Opening size: 22 mm
  • Socket profile: Six-point
590250Square 25.4 mm / opening 23 mm
  • Square-drive size: 25.4 mm
  • Opening size: 23 mm
  • Socket profile: Six-point
590251Square 25.4 mm / opening 24 mm
  • Square-drive size: 25.4 mm
  • Opening size: 24 mm
  • Socket profile: Six-point
590252Square 25.4 mm / opening 26 mm
  • Square-drive size: 25.4 mm
  • Opening size: 26 mm
  • Socket profile: Six-point
590253Square 25.4 mm / opening 27 mm
  • Square-drive size: 25.4 mm
  • Opening size: 27 mm
  • Socket profile: Six-point
590254Square 25.4 mm / opening 29 mm
  • Square-drive size: 25.4 mm
  • Opening size: 29 mm
  • Socket profile: Six-point
590255Square 25.4 mm / opening 30 mm
  • Square-drive size: 25.4 mm
  • Opening size: 30 mm
  • Socket profile: Six-point
590256Square 25.4 mm / opening 32 mm
  • Square-drive size: 25.4 mm
  • Opening size: 32 mm
  • Socket profile: Six-point
590257Square 25.4 mm / opening 35 mm
  • Square-drive size: 25.4 mm
  • Opening size: 35 mm
  • Socket profile: Six-point
590258Square 25.4 mm / opening 36 mm
  • Square-drive size: 25.4 mm
  • Opening size: 36 mm
  • Socket profile: Six-point
590259Square 25.4 mm / opening 38 mm
  • Square-drive size: 25.4 mm
  • Opening size: 38 mm
  • Socket profile: Six-point
590260Square 25.4 mm / opening 41 mm
  • Square-drive size: 25.4 mm
  • Opening size: 41 mm
  • Socket profile: Six-point
590261Square 25.4 mm / opening 46 mm
  • Square-drive size: 25.4 mm
  • Opening size: 46 mm
  • Socket profile: Six-point
590262Square 25.4 mm / opening 50 mm
  • Square-drive size: 25.4 mm
  • Opening size: 50 mm
  • Socket profile: Six-point
590263Square 25.4 mm / opening 55 mm
  • Square-drive size: 25.4 mm
  • Opening size: 55 mm
  • Socket profile: Six-point
590264Square 25.4 mm / opening 58 mm
  • Square-drive size: 25.4 mm
  • Opening size: 58 mm
  • Socket profile: Six-point
590265Square 25.4 mm / opening 60 mm
  • Square-drive size: 25.4 mm
  • Opening size: 60 mm
  • Socket profile: Six-point
590266Square 25.4 mm / opening 63 mm
  • Square-drive size: 25.4 mm
  • Opening size: 63 mm
  • Socket profile: Six-point

Six-point impact socket — 38.1 mm square

Six-point socket for impact-powered fastening. Square-drive size and opening size are listed separately. Length, wall thickness, retention system and compatibility with the selected wrench are confirmed before ordering.

IMPA codeConfigurationTechnical parameters
590267Square 38.1 mm / opening 46 mm
  • Square-drive size: 38.1 mm
  • Opening size: 46 mm
  • Socket profile: Six-point
590268Square 38.1 mm / opening 50 mm
  • Square-drive size: 38.1 mm
  • Opening size: 50 mm
  • Socket profile: Six-point
590269Square 38.1 mm / opening 54 mm
  • Square-drive size: 38.1 mm
  • Opening size: 54 mm
  • Socket profile: Six-point
590270Square 38.1 mm / opening 55 mm
  • Square-drive size: 38.1 mm
  • Opening size: 55 mm
  • Socket profile: Six-point
590271Square 38.1 mm / opening 58 mm
  • Square-drive size: 38.1 mm
  • Opening size: 58 mm
  • Socket profile: Six-point
590272Square 38.1 mm / opening 60 mm
  • Square-drive size: 38.1 mm
  • Opening size: 60 mm
  • Socket profile: Six-point
590273Square 38.1 mm / opening 63 mm
  • Square-drive size: 38.1 mm
  • Opening size: 63 mm
  • Socket profile: Six-point
590274Square 38.1 mm / opening 65 mm
  • Square-drive size: 38.1 mm
  • Opening size: 65 mm
  • Socket profile: Six-point
590275Square 38.1 mm / opening 67 mm
  • Square-drive size: 38.1 mm
  • Opening size: 67 mm
  • Socket profile: Six-point
590276Square 38.1 mm / opening 70 mm
  • Square-drive size: 38.1 mm
  • Opening size: 70 mm
  • Socket profile: Six-point
590277Square 38.1 mm / opening 71 mm
  • Square-drive size: 38.1 mm
  • Opening size: 71 mm
  • Socket profile: Six-point
590278Square 38.1 mm / opening 75 mm
  • Square-drive size: 38.1 mm
  • Opening size: 75 mm
  • Socket profile: Six-point
590279Square 38.1 mm / opening 77 mm
  • Square-drive size: 38.1 mm
  • Opening size: 77 mm
  • Socket profile: Six-point
590280Square 38.1 mm / opening 80 mm
  • Square-drive size: 38.1 mm
  • Opening size: 80 mm
  • Socket profile: Six-point
590281Square 38.1 mm / opening 85 mm
  • Square-drive size: 38.1 mm
  • Opening size: 85 mm
  • Socket profile: Six-point
590282Square 38.1 mm / opening 90 mm
  • Square-drive size: 38.1 mm
  • Opening size: 90 mm
  • Socket profile: Six-point
590283Square 38.1 mm / opening 95 mm
  • Square-drive size: 38.1 mm
  • Opening size: 95 mm
  • Socket profile: Six-point
590284Square 38.1 mm / opening 100 mm
  • Square-drive size: 38.1 mm
  • Opening size: 100 mm
  • Socket profile: Six-point
590285Square 38.1 mm / opening 105 mm
  • Square-drive size: 38.1 mm
  • Opening size: 105 mm
  • Socket profile: Six-point
590286Square 38.1 mm / opening 110 mm
  • Square-drive size: 38.1 mm
  • Opening size: 110 mm
  • Socket profile: Six-point
590287Square 38.1 mm / opening 115 mm
  • Square-drive size: 38.1 mm
  • Opening size: 115 mm
  • Socket profile: Six-point

Pneumatic hand drill

Hand-held air drill. Each variant states catalogue drilling capacity; this does not establish chuck clamping size or capacity in every material. Speed, reversibility, air consumption and chuck are checked against the selected product documentation.

IMPA codeConfigurationTechnical parameters
5903416.5 mm
  • Catalogue drilling capacity: 6.5 mm
  • Drive: Pneumatic
5903429.5 mm
  • Catalogue drilling capacity: 9.5 mm
  • Drive: Pneumatic
5903468 mm / UD-60-15
  • Catalogue drilling capacity: 8 mm
  • Catalogue model designation: UD-60-15
  • Drive: Pneumatic
59034713 mm
  • Catalogue drilling capacity: 13 mm
  • Drive: Pneumatic
59034816 mm / UD-80-04
  • Catalogue drilling capacity: 16 mm
  • Catalogue model designation: UD-80-04
  • Drive: Pneumatic

Pneumatic die grinder

Air-powered die grinder for local finishing of parts. Catalogue chuck size supports initial selection. Permitted speed, tooling, air consumption and included accessories require confirmation before ordering.

IMPA codeConfigurationTechnical parameters
590326Chuck 6 mm
  • Catalogue chuck size: 6 mm
  • Drive: Pneumatic

Pneumatic straight wheel grinder

Straight air grinder for an abrasive wheel. The three wheel dimensions retain their catalogue order; mounting and compatibility are checked against the offered machine drawing. Wheel, guards, permitted speed and air consumption are agreed separately.

IMPA codeConfigurationTechnical parameters
59033165 × 13 × 9.5 mm
  • Wheel dimensions in catalogue order: 65 × 13 × 9.5 mm
  • Drive: Pneumatic
590332125 × 19 × 12.7 mm
  • Wheel dimensions in catalogue order: 125 × 19 × 12.7 mm
  • Drive: Pneumatic
590333150 × 25 × 15.7 mm
  • Wheel dimensions in catalogue order: 150 × 25 × 15.7 mm
  • Drive: Pneumatic
59033476 × 13 × 9.5 mm
  • Wheel dimensions in catalogue order: 76 × 13 × 9.5 mm
  • Drive: Pneumatic

Pneumatic chipping hammer

Air hammer for chipping and removal of scale, weld residues and coatings. Round and hexagonal shank versions have separate codes. Exact shank dimensions, retainer, impact energy and required air flow are confirmed for the selected model.

IMPA codeConfigurationTechnical parameters
590361Round shank
  • Shank form: Round shank
  • Drive: Pneumatic
590362Hexagonal shank
  • Shank form: Hexagonal shank
  • Drive: Pneumatic

Pneumatic scaling hammer

Air tool for removal of rust and old coatings. Single-head and triple-head executions have separate codes. Replacement heads are selected only after checking the manufacturer, model and mounting dimensions.

IMPA codeConfigurationTechnical parameters
590382Working heads: 1
  • Number of working heads: 1
  • Drive: Pneumatic
590383Working heads: 3
  • Number of working heads: 3
  • Drive: Pneumatic

Pneumatic angle grinders

Select by catalogue wheel dimensions. Confirm bore, speed, air supply, guard and scope before ordering; the code does not designate a manufacturer.

IMPA codeConfigurationTechnical parameters
590301Wheel 100 × 6 × 15 mm
  • Catalogue wheel dimensions, mm: 100 × 6 × 15
  • Drive: Pneumatic
590302Wheel 180 × 6 × 22 mm
  • Catalogue wheel dimensions, mm: 180 × 6 × 22
  • Drive: Pneumatic
590304Wheel 115 × 6 × 22 mm
  • Catalogue wheel dimensions, mm: 115 × 6 × 22
  • Drive: Pneumatic
590350Wheel 125 × 6 × 22 mm
  • Catalogue wheel dimensions, mm: 125 × 6 × 22
  • Drive: Pneumatic
590303Wheel 230 × 7 × 22 mm
  • Catalogue wheel dimensions, mm: 230 × 7 × 22
  • Drive: Pneumatic
590305Wheel 58 × 3 × 9.6 mm
  • Catalogue wheel dimensions, mm: 58 × 3 × 9.6
  • Drive: Pneumatic

Chisels for pneumatic chipping hammers

Flat and moil-point chisels with round or hexagonal shanks. Selection requires hammer model and shank dimensions; matching shape does not establish compatibility.

IMPA codeConfigurationTechnical parameters
590366Flat · Round
  • Point: Flat
  • Shank form: Round
590367Moil point · Round
  • Point: Moil point
  • Shank form: Round
590372Flat · Hexagonal
  • Point: Flat
  • Shank form: Hexagonal
590373Moil point · Hexagonal
  • Point: Moil point
  • Shank form: Hexagonal

Air motor to specification

General air-motor request code without a fixed execution. Technical requirements are necessary for an offer.

IMPA codeConfigurationTechnical parameters
590620Execution to specification
  • Code scope: Air motor; execution to be specified

Radial-piston air motors · base mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590931DM1 · 0.86 kW
  • Catalogue designation: DM1
  • Catalogue power, kW: 0.86
  • Mounting: Base mount
590932DM3 · 1.73 kW
  • Catalogue designation: DM3
  • Catalogue power, kW: 1.73
  • Mounting: Base mount
590933DM9 · 3.90 kW
  • Catalogue designation: DM9
  • Catalogue power, kW: 3.90
  • Mounting: Base mount
590934DM220 · 7.15 kW
  • Catalogue designation: DM220
  • Catalogue power, kW: 7.15
  • Mounting: Base mount
590935DM36 · 11.99 kW
  • Catalogue designation: DM36
  • Catalogue power, kW: 11.99
  • Mounting: Base mount
590936DM45 · 17.62 kW
  • Catalogue designation: DM45
  • Catalogue power, kW: 17.62
  • Mounting: Base mount

Radial-piston air motors · flange mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590937DM1 · 0.86 kW
  • Catalogue designation: DM1
  • Catalogue power, kW: 0.86
  • Mounting: Flange mount
590938DM3 · 1.73 kW
  • Catalogue designation: DM3
  • Catalogue power, kW: 1.73
  • Mounting: Flange mount
590939DM9 · 3.90 kW
  • Catalogue designation: DM9
  • Catalogue power, kW: 3.90
  • Mounting: Flange mount
590940DM220 · 7.15 kW
  • Catalogue designation: DM220
  • Catalogue power, kW: 7.15
  • Mounting: Flange mount
590941DM36 · 11.99 kW
  • Catalogue designation: DM36
  • Catalogue power, kW: 11.99
  • Mounting: Flange mount
590942DM45 · 17.62 kW
  • Catalogue designation: DM45
  • Catalogue power, kW: 17.62
  • Mounting: Flange mount

VA vane air motors · base mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590951VA15 · 0.14 kW
  • Catalogue designation: VA15
  • Catalogue power, kW: 0.14
  • Mounting: Base mount
  • Rotation: One-way
590952VA30 · 0.27 kW
  • Catalogue designation: VA30
  • Catalogue power, kW: 0.27
  • Mounting: Base mount
  • Rotation: One-way
590953VA50 · 0.45 kW
  • Catalogue designation: VA50
  • Catalogue power, kW: 0.45
  • Mounting: Base mount
  • Rotation: One-way
590954VA100 · 0.90 kW
  • Catalogue designation: VA100
  • Catalogue power, kW: 0.90
  • Mounting: Base mount
  • Rotation: One-way

VA vane air motors · flange mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590955VA15 · 0.14 kW
  • Catalogue designation: VA15
  • Catalogue power, kW: 0.14
  • Mounting: Flange mount
  • Rotation: One-way
590956VA30 · 0.27 kW
  • Catalogue designation: VA30
  • Catalogue power, kW: 0.27
  • Mounting: Flange mount
  • Rotation: One-way
590957VA50 · 0.45 kW
  • Catalogue designation: VA50
  • Catalogue power, kW: 0.45
  • Mounting: Flange mount
  • Rotation: One-way
590958VA100 · 0.90 kW
  • Catalogue designation: VA100
  • Catalogue power, kW: 0.90
  • Mounting: Flange mount
  • Rotation: One-way

VA vane air motors · face mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590959VA15 · 0.14 kW
  • Catalogue designation: VA15
  • Catalogue power, kW: 0.14
  • Mounting: Face mount
  • Rotation: One-way
590960VA30 · 0.27 kW
  • Catalogue designation: VA30
  • Catalogue power, kW: 0.27
  • Mounting: Face mount
  • Rotation: One-way
590961VA50 · 0.45 kW
  • Catalogue designation: VA50
  • Catalogue power, kW: 0.45
  • Mounting: Face mount
  • Rotation: One-way
590962VA100 · 0.90 kW
  • Catalogue designation: VA100
  • Catalogue power, kW: 0.90
  • Mounting: Face mount
  • Rotation: One-way

VF reversible air motors · base mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590965VF05 · 0.38 kW
  • Catalogue designation: VF05
  • Catalogue power, kW: 0.38
  • Mounting: Base mount
  • Rotation: Two-way
590966VF10 · 0.75 kW
  • Catalogue designation: VF10
  • Catalogue power, kW: 0.75
  • Mounting: Base mount
  • Rotation: Two-way
590967VF20 · 1.50 kW
  • Catalogue designation: VF20
  • Catalogue power, kW: 1.50
  • Mounting: Base mount
  • Rotation: Two-way
590968VF30 · 2.25 kW
  • Catalogue designation: VF30
  • Catalogue power, kW: 2.25
  • Mounting: Base mount
  • Rotation: Two-way
590969VF50 · 3.76 kW
  • Catalogue designation: VF50
  • Catalogue power, kW: 3.76
  • Mounting: Base mount
  • Rotation: Two-way
590970VF70 · 5.71 kW
  • Catalogue designation: VF70
  • Catalogue power, kW: 5.71
  • Mounting: Base mount
  • Rotation: Two-way

VF reversible air motors · flange mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590971VF05 · 0.38 kW
  • Catalogue designation: VF05
  • Catalogue power, kW: 0.38
  • Mounting: Flange mount
  • Rotation: Two-way
590972VF10 · 0.75 kW
  • Catalogue designation: VF10
  • Catalogue power, kW: 0.75
  • Mounting: Flange mount
  • Rotation: Two-way
590973VF20 · 1.50 kW
  • Catalogue designation: VF20
  • Catalogue power, kW: 1.50
  • Mounting: Flange mount
  • Rotation: Two-way
590974VF30 · 2.25 kW
  • Catalogue designation: VF30
  • Catalogue power, kW: 2.25
  • Mounting: Flange mount
  • Rotation: Two-way
590975VF50 · 3.76 kW
  • Catalogue designation: VF50
  • Catalogue power, kW: 3.76
  • Mounting: Flange mount
  • Rotation: Two-way
590976VF70 · 5.71 kW
  • Catalogue designation: VF70
  • Catalogue power, kW: 5.71
  • Mounting: Flange mount
  • Rotation: Two-way

VF reversible air motors · face mount

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590977VF05 · 0.38 kW
  • Catalogue designation: VF05
  • Catalogue power, kW: 0.38
  • Mounting: Face mount
  • Rotation: Two-way
590978VF10 · 0.75 kW
  • Catalogue designation: VF10
  • Catalogue power, kW: 0.75
  • Mounting: Face mount
  • Rotation: Two-way
590979VF20 · 1.50 kW
  • Catalogue designation: VF20
  • Catalogue power, kW: 1.50
  • Mounting: Face mount
  • Rotation: Two-way
590980VF30 · 2.25 kW
  • Catalogue designation: VF30
  • Catalogue power, kW: 2.25
  • Mounting: Face mount
  • Rotation: Two-way
590981VF50 · 3.76 kW
  • Catalogue designation: VF50
  • Catalogue power, kW: 3.76
  • Mounting: Face mount
  • Rotation: Two-way
590982VF70 · 5.71 kW
  • Catalogue designation: VF70
  • Catalogue power, kW: 5.71
  • Mounting: Face mount
  • Rotation: Two-way

AGM gear-turbine air motors

Catalogue designation and power are stated. Confirm mounting, shaft, speed, torque and air conditions against the offered datasheet/drawing; a code does not establish explosion protection or compatibility.

IMPA codeConfigurationTechnical parameters
590985AGM6 · 5.65 kW
  • Catalogue designation: AGM6
  • Catalogue power, kW: 5.65
  • Control: Handle
590986AGM10 · 8.95 kW
  • Catalogue designation: AGM10
  • Catalogue power, kW: 8.95
  • Control: Handle
590987AGM15 · 14.14 kW
  • Catalogue designation: AGM15
  • Catalogue power, kW: 14.14
  • Control: Handle
590988AGM23 · 22.46 kW
  • Catalogue designation: AGM23
  • Catalogue power, kW: 22.46
  • Control: Handle
590989AGM40 · 37.70 kW
  • Catalogue designation: AGM40
  • Catalogue power, kW: 37.70
  • Control: Handle

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiryContacts