Steel wire rope 6×24+7FC

The base construction 6×24 and nominal diameter 8 mm match; OEM table constructions: 6×24+7FC. IMPA 212203 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 8 mm match; OEM table constructions: 6×24+7FC. IMPA 212253 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 9 mm match; OEM table constructions: 6×24+7FC. IMPA 212204 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 9 mm match; OEM table constructions: 6×24+7FC. IMPA 212254 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 10 mm match; OEM table constructions: 6×24+7FC. IMPA 212205 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 10 mm match; OEM table constructions: 6×24+7FC. IMPA 212255 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 12 mm match; OEM table constructions: 6×24+7FC. IMPA 212207 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 12 mm match; OEM table constructions: 6×24+7FC. IMPA 212257 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 14 mm match; OEM table constructions: 6×24+7FC. IMPA 212209 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 14 mm match; OEM table constructions: 6×24+7FC. IMPA 212259 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 16 mm match; OEM table constructions: 6×24+7FC. IMPA 212210 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 16 mm match; OEM table constructions: 6×24+7FC. IMPA 212260 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 18 mm match; OEM table constructions: 6×24+7FC. IMPA 212211 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 18 mm match; OEM table constructions: 6×24+7FC. IMPA 212261 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 20 mm match; OEM table constructions: 6×24+7FC. IMPA 212212 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 20 mm match; OEM table constructions: 6×24+7FC. IMPA 212262 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 22 mm match; OEM table constructions: 6×24+7FC. IMPA 212213 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 22 mm match; OEM table constructions: 6×24+7FC. IMPA 212263 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 24 mm match; OEM table constructions: 6×24+7FC. IMPA 212215 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 24 mm match; OEM table constructions: 6×24+7FC. IMPA 212265 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 26 mm match; OEM table constructions: 6×24+7FC. IMPA 212217 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 26 mm match; OEM table constructions: 6×24+7FC. IMPA 212267 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 28 mm match; OEM table constructions: 6×24+7FC. IMPA 212218 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 28 mm match; OEM table constructions: 6×24+7FC. IMPA 212268 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 30 mm match; OEM table constructions: 6×24+7FC. IMPA 212219 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 30 mm match; OEM table constructions: 6×24+7FC. IMPA 212269 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 32 mm match; OEM table constructions: 6×24+7FC. IMPA 212221 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 32 mm match; OEM table constructions: 6×24+7FC. IMPA 212271 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 34 mm match; OEM table constructions: 6×24+7FC. IMPA 212223 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 34 mm match; OEM table constructions: 6×24+7FC. IMPA 212273 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 36 mm match; OEM table constructions: 6×24+7FC. IMPA 212225 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 36 mm match; OEM table constructions: 6×24+7FC. IMPA 212275 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 38 mm match; OEM table constructions: 6×24+7FC. IMPA 212227 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 38 mm match; OEM table constructions: 6×24+7FC. IMPA 212277 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 40 mm match; OEM table constructions: 6×24+7FC. IMPA 212228 specifies galvanized steel and a 200 m coil. The OEM row does not establish finish or coil length; galvanized execution and 200 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.

The base construction 6×24 and nominal diameter 40 mm match; OEM table constructions: 6×24+7FC. IMPA 212278 specifies galvanized steel and a 220 m coil. The OEM row does not establish finish or coil length; galvanized execution and 220 m length still require confirmation. The OEM table specifies 7FC; retain this core. Any different core is not agreed. Tensile grade (MPa), breaking force, working load limit, lay and documents must be agreed for the offered execution. This is a selection candidate, not a confirmed replacement.