Skip to content
  1. Home
  2. Equipment catalogue
  3. Rigging: shackles, clips, ropes and slings
  4. Webmaster 1600 nylon twisted-eye slings

ХАЛЛ ГРУПП · Equipment catalogue

Webmaster 1600 nylon twisted-eye slings

Exact one-ply and two-ply executions from the Lift-All table. Rated vertical capacity is retained in source pounds. Overall sling length is specified separately from the execution part number. Nylon and polyester, and flat and twisted eyes, are treated separately.

Technical parameters

Material
Nylon
Eye type
Type 4 (twisted)

Configurations and specifications

ConfigurationTechnical parametersIMPA correspondence
EE1801NT · 1″ · 1 ply
  • Maker execution part number: EE1801NT
  • Web width: 1 in
  • Web plies: 1
  • Maker-table eye length: 8.5 in
  • Rated vertical working load: 1600 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1802NT · 2″ · 1 ply
  • Maker execution part number: EE1802NT
  • Web width: 2 in
  • Web plies: 1
  • Maker-table eye length: 10 in
  • Rated vertical working load: 3200 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1803NT · 3″ · 1 ply
  • Maker execution part number: EE1803NT
  • Web width: 3 in
  • Web plies: 1
  • Maker-table eye length: 11 in
  • Rated vertical working load: 4800 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1804NT · 4″ · 1 ply
  • Maker execution part number: EE1804NT
  • Web width: 4 in
  • Web plies: 1
  • Maker-table eye length: 12 in
  • Rated vertical working load: 6400 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1806NT · 6″ · 1 ply
  • Maker execution part number: EE1806NT
  • Web width: 6 in
  • Web plies: 1
  • Maker-table eye length: 16 in
  • Rated vertical working load: 9600 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1808NT · 8″ · 1 ply
  • Maker execution part number: EE1808NT
  • Web width: 8 in
  • Web plies: 1
  • Maker-table eye length: 20 in
  • Rated vertical working load: 12800 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1810NT · 10″ · 1 ply
  • Maker execution part number: EE1810NT
  • Web width: 10 in
  • Web plies: 1
  • Maker-table eye length: 24 in
  • Rated vertical working load: 16000 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE1812NT · 12″ · 1 ply
  • Maker execution part number: EE1812NT
  • Web width: 12 in
  • Web plies: 1
  • Maker-table eye length: 24 in
  • Rated vertical working load: 19200 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2801NT · 1″ · 2 ply
  • Maker execution part number: EE2801NT
  • Web width: 1 in
  • Web plies: 2
  • Maker-table eye length: 8.5 in
  • Rated vertical working load: 3200 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2802NT · 2″ · 2 ply
  • Maker execution part number: EE2802NT
  • Web width: 2 in
  • Web plies: 2
  • Maker-table eye length: 10 in
  • Rated vertical working load: 6400 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2803NT · 3″ · 2 ply
  • Maker execution part number: EE2803NT
  • Web width: 3 in
  • Web plies: 2
  • Maker-table eye length: 11 in
  • Rated vertical working load: 8800 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2804NT · 4″ · 2 ply
  • Maker execution part number: EE2804NT
  • Web width: 4 in
  • Web plies: 2
  • Maker-table eye length: 12 in
  • Rated vertical working load: 11500 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2806NT · 6″ · 2 ply
  • Maker execution part number: EE2806NT
  • Web width: 6 in
  • Web plies: 2
  • Maker-table eye length: 16 in
  • Rated vertical working load: 16500 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2808NT · 8″ · 2 ply
  • Maker execution part number: EE2808NT
  • Web width: 8 in
  • Web plies: 2
  • Maker-table eye length: 20 in
  • Rated vertical working load: 19200 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2810NT · 10″ · 2 ply
  • Maker execution part number: EE2810NT
  • Web width: 10 in
  • Web plies: 2
  • Maker-table eye length: 24 in
  • Rated vertical working load: 22400 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

EE2812NT · 12″ · 2 ply
  • Maker execution part number: EE2812NT
  • Web width: 12 in
  • Web plies: 2
  • Maker-table eye length: 24 in
  • Rated vertical working load: 26900 lb
232191
Execution requires verification

IMPA 232191 · nylon belt sling 232191 is verified as a nylon belt sling, but the code does not define width, length, plies, eye type or WLL. The Webmaster 1600 article is selected to a separate specification; no direct maker-to-IMPA mapping was found.

Selection and applicability

Overall length, service conditions, marking and batch documentation are confirmed during selection. This card does not calculate capacities for other hitches. The photograph identifies the series material and eye type, not its width or ply count.

Photographs and drawings

Include with your enquiry

  • Application, lifting arrangement, WLL and required safety factor
  • Material, coating, rope construction and connection design
  • Length, diameter, termination, markings and supporting documents

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.