ХАЛЛ ГРУПП · Equipment catalogue

6×7+FC steel wire rope, 1770 MPa

Electro-galvanized 6, 8 and 10 mm executions with right-hand regular lay. The 500 m reel is specified separately from standard IMPA coils. 1770 MPa is a wire tensile grade, not a rope working-load limit.

Open selection and send an enquiry client@hallgroup.ru

Technical parameters

Construction: 6×7+FC
Finish: Electro-galvanized
Lay: RHRL
Wire tensile grade: 1770 MPa
Length per reel: 500 m
Core: FC

Configurations and specifications

Configuration	Technical parameters	IMPA correspondence
Ø6 mm · 500 m	Nominal diameter: 6 mm Theoretical net rope mass per reel: 63.18 kg	212001 Execution requires verification Reference IMPA 212001 · 200 m coil 6×7 construction and diameter match, but the IMPA entry specifies a 200 m coil while this reel is 500 m. The code does not establish FC, 1770 MPa or RHRL. This is not an exact execution match.
Ø8 mm · 500 m	Nominal diameter: 8 mm Theoretical net rope mass per reel: 112.32 kg	212003 Execution requires verification Reference IMPA 212003 · 200 m coil 6×7 construction and diameter match, but the IMPA entry specifies a 200 m coil while this reel is 500 m. The code does not establish FC, 1770 MPa or RHRL. This is not an exact execution match.
Ø10 mm · 500 m	Nominal diameter: 10 mm Theoretical net rope mass per reel: 175.50 kg	212005 Execution requires verification Reference IMPA 212005 · 200 m coil 6×7 construction and diameter match, but the IMPA entry specifies a 200 m coil while this reel is 500 m. The code does not establish FC, 1770 MPa or RHRL. This is not an exact execution match.

Selection and applicability

Minimum breaking force, tolerances, lubrication, terminations and batch documentation are agreed for the application. Catalogue images show construction, not a particular batch or diameter. The offer does not identify the fibre-core material.

Photographs and drawings

**6×7+FC cross-section photograph**Cut sample on the official website of the maker associated with the technical offer. The sample collar is not an ordered termination; the pictured diameter is not identified.

**6×7+FC cross-section diagram**Six seven-wire strands around a fibre core. Maker diagram without dimensions.

Include with your enquiry

Application, lifting arrangement, WLL and required safety factor
Material, coating, rope construction and connection design
Length, diameter, termination, markings and supporting documents

Related sections

Request an offer

The specification, documents and supply terms are agreed for your enquiry. Supplier stock, lead time and price are confirmed in a separate offer.

Open selection and send an enquiry Contacts